ObjectiveTo summarize the clinical features and experience of Methicillin-resistant Staphylococcus aureus (MRSA)-associated enteritis. MethodsClinical data of 21 patients with MRSA-associated enteritis who were treated in our hospital from Jan. 2003 to May. 2015 were analyzed retrospectively. ResultsAfter diagnosed or suspected of MRSA-associated enteritis, the 21 patients received a drug therapy with vancomycin instead of other antibiotic, 3 patients (14.3%) who failed to get satisfactory symptom relief received a plus therapy with biapenem; 13 patients (61.9%) received treatment which plus drugs such as Bacillus licheniformis capsules or combining Bifidobacterium to regulate intestinal microflora. Severe complications, such as intestinal fistula (8 patients, 38.1%）, toxic shock (16 patients, 76.2%）, organ system failure (14 patients, 66.7%) occurred in 17 patients (80.9%) of the 21 patients when 2-7 days (mean of 4.7 days) after diarrhea. Among 21 patients received therapy, 7 patients (33.3%) were cured and 2 patients (9.5%) were improved, whereas 11 patients died, with a total mortality of 52.4%, another 1 patient was lost to follow up (4.8%). There were 8 patients who were followed-up for 1-12 months (the median time was 3.1-month). During the followed-up period, 2 of them died and others stayed alive without occurrence. ConclusionAlthough uncommon, MRSA-associated enteritis progressed rapidly, with many complications and high mortality rate. Early diagnosis and timely targeted treatment restoring the balance of gastrointestinal microecology are the key to decrease its mortality.
Objective To observe the inhibitory characteristics of silver nanoparticles (AgNP) on bacterial biofilms and investigate their inhibitory effect on biofilm formation on three common orthopedic biomaterials. Methods The minimal inhibitory concentration (MIC) and minimal biofilm inhibitory concentration (MBIC) of AgNP were determined by microplate dilution assay. Biofilms of Staphylococcus aureus (ATCC 25923) were cultured on three orthopedic biomaterials (titanium alloy, titanium oxide, and stainless steel) and intervened with AgNP at concentrations of 32, 16, 8, 4, 2 and 0 μg/mL to determine the MBICs on the three materials. The effects of AgNP on biofilm formation were analyzed by scanning electron microscopy and measuring optical density. Results The MIC and MBIC of AgNP in the microplate assay were both 16 µg/mL. The MBICs of AgNP on biofilm formation in titanium oxide, titanium alloy, and stainless steel were 16 μg/mL, 32 μg/mL, and 32 μg/mL, respectively. Among the three materials, the lowest optical density was observed on titanium oxide, while the highest was on titanium alloy. Conclusions AgNP has strong antibacterial biofilm characteristics and can prevent the formation of Staphylococcus aureus biofilm in vitro. Biofilm formation is most pronounced on titanium alloy, least on titanium oxide, and intermediate on stainless steel.
OBJECTIVE: To investigate the ability of repairing bone defect with the compound of coralline hydroxyapatite porous (CHAP), fibrin sealant(FS) and staphylococcus aureus injection (SAI), and the feasibility to use the compounds as bone substitute material. METHODS: The animal model of bone defect was made on the bilateral radius of 54 New Zealand white rabbits, which were randomly divided into the experimental group(the defect was repaired with CHAP-FS-SAI), control group(with autograft) and blank control group(the defect was left unrepaired) with 18 rabbits in each group. The ability of bone defect repair was evaluated by gross observation, histopathological study, X-ray and biomechanical analysis 2, 4, 8 and 12 weeks after repair. RESULTS: (1) In the 2nd week, tight fibro-connection could be found between the implant and fracture site and there were many fibroblasts and capillary proliferation with many chondrocytes around CHAP in the experimental group, while only a few callus formed, and chondrocytes, osteoblast and osteoclast existed in the control group. (2) In experimental group and control group, a large quantity of callus was found 4 and 8 weeks; ossification of chondrocytes with weave bone formation were found 4 weeks and many osteocytes and weave bones and laminar bones were found 8 weeks. (3) In the 12th week, the complete ossification of implant with well bone remodeling, a large number of mature osteocytes and laminar were found in experimental group and control group, and CHAP still existed in the experimental group; the defect area filled with fibro-scar tissue and only many fibroblasts could be seen in blank control group. (4) X-ray findings were the following: In experimental and control groups, callus formation could be seen 2 weeks postoperatively, more callus formed 4 weeks, the bone defect area disappeared and CHAP scattered in the callus 8 weeks; the fracture line disappeared and medullary cavity became united (in control group); and in the 12th week, the cortex became continuous, the medullary cavity became united, and remodeling completed, while bone defect was not still united in blank control group. The maximal torque and torsional stiffness in the experimental group is higher than those in the control group 2 weeks (P lt; 0.05), but there was no significant difference (P gt; 0.05) between the two groups 4, 8, 12 weeks after repair. CONCLUSION: The compound of CHAP-FS-SAI has good biological compatibility, and it can be used for one kind of bone substitute material to repair the bone defect.
ObjectiveTo construct a prokaryotic expression strain of Staphylococcus aureus fibronectin binding protein A (FnBPA) r10-11 truncated fusion protein, and explore the immunogenicity of FnBPAr10-11. MethodsPloymerase chain reaction (PCR) amplification was carried out from the whole genome sequence of Staphylococcus aureus Newman strain by recombinant PCR technique. The amplified product was purified and transformed into Escherichia coli DH5α for cloning. The recombinant plasmid was extracted and identified by double enzyme digestion. The recovered fragment was ligated into the pET-32a plasmid and transformed into Escherichia coli BL21 (DE3) for prokaryotic expression. The FnBPAr10-11 was purified by HIS protein purification column, identified by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and used to immunize mice, and the mice were divided into phosphate buffered saline (PBS) group, FnBPA group, and FnBPAr10-11 group. The serum levels of immunoglobulin G (IgG) and cytokines, and the immune protection rate of the mice were detected. ResultsSDS-PAGE result showed that the relative molecular mass of the protein was about 33.1×103. The titers of IgG antibody in FnBPAr10-11 group and FnBPA group reached 1∶128 000, and were significantly different compared with PBS group (P<0.05). The cytokine level in FnBPAr10-11 group was not significantly different compared with that in FnBPA group, and they were extremely significant (P<0.01) compared with that in PBS group. The immuno-protective effect of the FnBPAr10-11 group was over 50%. ConclusionsThe prokaryotic expression strain of Staphylococcus aureu FnBPAr10-11 truncated fusion protein was successfully constructed. The truncated protein has good immunogenicity.
Objective To investigate the incidence rate, molecular epidemiology and risk factors for methicillin-resistant Staphylococcus aureus (MRSA) infection. Methods A total of 119 Staphylococcus aureus strains isolated from January 2016 to December 2020 in general surgery of this hospital were collected retrospectively and divided into MRSA group and methicillin-sensitive Staphylococcus aureus group according to whether or not resistant to oxacillin. The clinical data of all patients infected with Staphylococcus aureus and drug sensitivity of Staphylococcus aureus were collected. Molecular typing was performed by multilocus sequence typing (MLST), resistance gene, virulence gene and biofilm gene were detected by polymerase chain reaction (PCR) method, and a case-control study was used to identify risk factors for MRSA infection. ResultsThe detection rate of MRSA was 57.98% (69/119), mainly was from pus specimens (80.67%, 96/119). The results of MLST showed that the dominant clone types were ST88 (37.68%, 26/69), ST951 (27.54%, 19/69) and ST59 (18.84%, 13/69). The results of PCR showed that the detection rates of mecA, mecC, Aac (6′ )/Aph (2′ ′ ), Aph (3)-Ⅲ, ant (4′ )- Ⅰ a, tetM, qnrA, panton-valentine leukocidin, fibronectin-binding protein A, staphylococcal enterotoxin A, staphylococcal enterotoxin B, α-hemolysins, intracellular adhesion A, staphylococcal accessory regulators A, and fibronectin-binding protein B in 69 strains of MRSA were 100%, 0.00%, 27.54%, 34.78%, 18.84%, 14.49%, 1.45%, 8.70%, 98.55%, 11.59%, 91.30%, 94.20%, 92.75%, 97.10% and 86.96%, respectively. Multivariate analysis showed that hospital transfer, wound infection, catheter related infection, drainage tube and history of cephalosporin using were risk factors for MRSA infection. ConclusionsThe detection rate of MRSA in general surgery of this hospital is high. ST88 is the most common clone type. The carrying rates of resistant-, virulence- and biofilm-related genes are high. Hospital transfer, wound infection, drainage tube, history of cephalosporin using etc. are high risk factors for MRSA infection. It is advised that invasive operation should be reduced, antibiotics should be used rationally, hand hygiene should be paid attention to, environmental sanitation disinfection should be carried out regularly, and the monitoring of MRSA bacteria should be strengthened, so as to reduce and control the infection and spread of MRSA.
ObjectiveTo analyze the characteristics of distribution and drug resistance of clinical isolated staphylococci in the Whire Union Bacterial Resistance Surveillance Network across Sichuan from 2015 to 2018, so as to provide reference for clinical rational drug use and management of drug-resistant bacteria in Sichuan.MethodsA total of 18 023 strains of staphylococci were isolated from 9 hospitals of Whire Union Bacterial Resistance Surveillance Network for four years (2015-2018). Drug susceptibility test was carried out by disk diffusion method or automated instrument method. The data were statistically analyzed by WHONET 5.6 according to CLSI 2016 standard.ResultsThe 18 023 strains of staphylococci included 10 865 (60.28%) Staphylococcus aureus and 7 158 (39.72%) coagulase negative staphylococci. No strains resistant to vancomycin and linezolid were found. The detection rates of methicillin-resistant Staphylococcus aureus and methicillin-resistant coagulase-negative staphylococci were 25.10% (2 727/ 10 865) and 75.60% (5 411/7 158), respectively. The sensitivity of methicillin-resistant staphylococci to most antibiotics was significantly lower than that of methicillin-sensitive strains (P<0.05). The susceptibility rate of staphylococci to some antibiotics was significantly different from 2015 to 2018(P<0.05). The susceptibility rates of Staphylococcus aureus from different samples to rifampicin, moxifloxacin, ciprofloxacin, levofloxacin, oxacillin and erythromycin were significantly different (P<0.05). The susceptibility rates of Staphylococcus aureus from different departments in different samples of sulfamethoxazole, rifampicin, moxifloxacin, ciprofloxacin, levofloxacin, oxacillin, gentamicin, tetracycline, clindamycin and erythromycin were significantly different (P<0.05).ConclusionsThe susceptibility of strains isolated from different periods, different specimens and departments to the same antimicrobial agents varies greatly. For the infection of staphylococci, we should use drugs under the guidance of drug susceptibility according to the source of samples, which can avoid the abuse of beta-lactam drugs. Strengthening the monitoring and control of drug-resistant bacteria can prevent or reduce the spread of drug-resistant bacteria.
Methicillin-resistant Staphylococcus aureus is one of the important pathogens of healthcare-associated infections. In order to prevent and control the transmission of the drug-resistant organism in healthcare facilities, the Healthcare Infection Society and the Infection Prevention Society jointly conducted the guidelines for the prevention and control of methicillin-resistant Staphylococcus aureus in 2021. This article introduces the guide from the background, preparation process, main prevention and control measures and further studies, and compares the guidelines with the current prevention and control measures in China, so as to provide a methodological reference for preparation of the guide for domestic infection prevention and control practitioners, and provide evidence-based prevention and control strategies for clinical practice.
ObjectiveTo explore drug resistance, resistant mechanisms and resistant phenotypes of staphylococcus aureus (SA) isolated from wound secretion to macrolides-lincosamides-streptogramins (MLS). MethodsA retrospective design was used to collect clinical data and antimicrobial resistance profiles of SA in the First Affiliated Hospital and the Second Affiliated Hospital of Fujian Medical University and Anxi County Hospital from June, 2008 to October, 2015. SPSS 19.0 software was used for data analysis. ResultsA total of 127 isolates were included. The distribution of four resistant phenotypes of SA to MLS were all susceptibility(S) type (n=48, 37.8%), ML type (n=41, 32.3%), M/iCR+ type (n=22, 17.3%) and MLS type (n=16, 12.6%), respectively; There were three kinds of phenotypes caused by target changing including ML type, M/iCR+ type and MLS type, respectively. Moreover, no moxicaxin, linezolid or tigecyline resistant strain was detected, while quinolons and tetracyclines showed low-level resistant. ConclusionCompared with the different samples, the resistant phenotypes of SA isolated from wound secretion to MLS are few, and the total resistance ratio is low.
Objective Mesh infection may occur after incisional hernia repair using prosthetic mesh. Preparation of antibiotics-bonded meshes to prevent infection is one of the solutions. To evaluate the anti-infection effect of polypropylene mesh bonded norvancomycin slow-release microsphere by preparing the rat model of incisional hernia repair contaminatedwith Staphylococcus aureus. Methods The norvancomycin slow-release microspheres were prepared by emulsion and solvent evaporation method and they were bonded to polypropylene mesh (50 mg/mesh). The appearance of the microspheres was observed using scanning electronic microscope (SEM). The content of norvancomycin in microspheres and the release rate of the norvancomycin in norvancomycin-bonded polypropylene mesh were detected using high performance l iquid chromatography method. The rat models of incisional hernia were developed in 40 healthy Sprague Dawley rats, aged 10-11 weeks and weighing 200-250 g. The rats were divided randomly into the experimental group (norvancomycin-bonded polypropylene mesh repair, n=20) and the control group (polypropylene mesh repair, n=20). And then the mesh was contaminated with Staphylococcus aureus. The wound heal ing was observed after operation. At 3 weeks after operation, the mesh and the tissue around the mesh were harvested to perform histological observation and to classify the inflammatory reaction degree. Results The norvancomycin microsphere had integrated appearance and smooth surface with uniform particle diameter, 64% of particlediameter at 60 to 100 μm, and the loading-capacity of norvancomycin was 19.79%. The norvancomycin-bonded polypropylene patch had well-distributed surface and the loading-capacity of norvancomycin was (7.90 ± 0.85) mg/cm2. The release time of norvancomycin in vitro could last above 28 days and the accumulative release rate was 72.6%. The rats of 2 groups all survived to experiment completion. Wound infection occurred in 2 rats of the experimental group (10%) and 20 rats of the control group (100%), showing significant difference (χ2=32.727 3, P=0.000 0). The inflammatory reaction in experimental group was not obvious, grade I in 16 rats and grade II in 4 rats, and numerous inflammatory cell infiltration occurred in the control group, grade II in 3 rats and grade III in 17 rats, showing significant difference (Z=32.314, P=0.000). Conclusion The polypropylene mesh bonded norvancomycin slow-release microsphere has definite anti-infection effect in rat model of incisional hernia repair contaminated by Staphylococcus aureus.
Objective To evaluate the toxic effects of staphylococcus aureus exotoxins and neutrophils on retinal pigment epithelium (RPE) cells (RPEC). Methods An in-vitro model of bacteroidal endophthalmitis was established by co-culturing of human RPE cell line D407 and human peripheral blood neutrophils in the present of staphylococcus aureus exotoxins ATCC29213. The level of lactate dehydrogenase hydroxide（LDH）in the cuture supernant was measured, and the viability of RPE was evlauated by flow cytometry and Hoechst 33342/Propidium Iodide（PI）staining. Results When RPE cells were cultured with the exotoxin ATCC29213, the LDH level and necrotic RPE cells were positive proportional to the dosage of exotoxin, but only 250mu;l or 500mu;l of ATCC29213 had a statistical significant effect. When RPE cells were co-cultured with neutrophils in the present of ATCC29213 for 6 hours, 100mu;l of ATCC29213 already had a statistical significant effect on LDH level and necrotic RPEC, and the effect was proportional to the amount of neutrophils in the culture. Conclusion Both staphylococcus aureus exotoxins and neutrophils can damage the RPEC by inducing necrosis, and their function had synergetic effect.