“Patient profile” is a specific application of user profile technology in the field of healthcare. As an emerging means of integrating health information, it provides personalized and precise health management for patients by analyzing multidimensional health data, improving health management effectiveness, reducing medical costs, and increasing their satisfaction and participation. It has broad application prospects in the field of nursing, but the current research status of its application in the field of nursing is not clear. This article reviews the application progress of patient profile based on big data in the field of nursing at home and abroad, systematically analyzes its construction methods, application scenarios, implementation effects and challenges, and puts forward relevant suggestions, aiming to provide references for the precise and intelligent development of nursing services.
Objective To evaluate the safety and effectiveness of anterior cervical discectomy and fusion (ACDF) by using zero-profile anchored cage (ZAC) in treatment of consecutive three-level cervical spondylosis, by comparing with plate-cage construct (PCC). Methods A clinical data of 65 patients with cervical spondylosis admitted between January 2020 and December 2022 and met the selection criteria was retrospectively analyzed. During consecutive three-level ACDF, 35 patients were fixed with ZAC (ZAC group) and 30 patients with PCC (PCC group). There was no significant difference in baseline data between the two groups (P>0.05), including gender, age, body mass index, surgical segment, preoperative Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), visual analogue scale (VAS) score, prevertebral soft tissue thickness (PSTT), cervical lordosis, and surgical segmental angle. The operation time, intraoperative blood loss, hospital stay, clinical indicators (JOA score, NDI, VAS score), and radiological indicators (cervical lordosis, surgical segmental angle, implant subsidence, surgical segment fusion, and adjacent segment degeneration), and the postoperative complications [swelling of the neck (PSTT), dysphagia] were recorded and compared between the two groups. Results Patients in both groups were followed up 24-39 months. There was no significant difference in follow-up duration between the two groups (P>0.05). The operation time and intraoperative blood loss were lower in ZAC group than in PCC group, and the length of hospital stay was longer, but there was no significant difference (P>0.05). At each time point after operation, both groups showed significant improvements in JOA score, VAS score, and NDI compared with preoperative scores (P<0.05), but there was no significant difference between the two groups at each time point after operation (P>0.05). Both groups showed an increase in PSTT at 3 days and 3, 6 months after operation compared to preoperative levels (P<0.05), but returned to preoperative levels at last follow-up (P>0.05). The PSTT at 3 days and 3 months after operation were significantly lower in ZAC group than in PCC group (P<0.05), and there was no significant difference between the two groups at 6 months and at last follow-up (P>0.05). The incidences of dysphagia at 3 days and 3 months were significantly lower in ZAC group than in PCC group (P<0.05), while no significant difference was observed at 6 months and last follow-up between the two groups (P>0.05). There was no postoperative complication in both groups including hoarseness, esophageal injury, cough, or hematoma. Both groups showed improvement in cervical lordosis and surgical segmental angle compared to preoperative levels, with a trend of loss during follow-up. The cervical lordosis loss and surgical segmental angle loss were significantly more in the ZAC group than in PCC group (P<0.05). The incidence of implante subsidence was significantly higher in ZAC group than in PCC group (P<0.05). There was no significant difference between the ZAC group and PCC group in the incidences of surgical segment fusion and adjacent segment degeneration (P>0.05). ConclusionIn consecutive three-level ACDF, both ZAC and PCC can achieve satisfactory effectiveness. The former can reduce the incidence of postoperative dysphagia, while the latter can better maintain cervical curvature and reduce the incidence of implant subsidence.
ObjectiveTo investigate the clinical heterogeneity and auto-immunologic state in patients with diabetic ketosis (DK) or diabetic ketoacidosis (DKA). MethodsDiabetic patients who presented with DK/DKA were recruited from West China Hospital of Sichuan University from January 1, 2000, to December 31, 2008. We analyzed the clinical classification, biochemical profiles, and auto-immunologic state of the patients. ResultsAmong them, 257 (15.0%) patients had type 1 diabetes, while 883 (51.6%) with type 2 diabetes, and 515 (30.1%) could be typed as "atypical diabetes" or "untying diabetes". The average age of hospitalized patients with type 1 diabetes was (31.1±13.5) years, which was significantly lower than that of the type 2 diabetes patients [(58.1±13.2) years] (P＜0.001). The most common contributing factor for DK/DKA was infection, followed by noncompliance with therapy. Glutamic acid decarboxylase antibody positive rate was 4.37% in patients with "atypical diabetes", which was similar with type 2 diabetes group (2.69%, P=0.79), but lower than that of the patients with type 1 diabetes (13.79%, P＜0.001). ConclusionsWe conclude that DK or DKA can occur not only in type 1 diabetic patients but also in patients with type 2 diabetes under infection or stress condition. DK/DKA patients have a high clinical heterogeneity. The auto-immunologic state and β-cell function have significant implications for the diagnosis and classification of diabetes.
Objective To evaluate the safety and effectiveness of applying self-stabilizing zero-profile three-dimensional (3D) printed artificial vertebral bodies in anterior cervical corpectomy and fusion (ACCF) for cervical spondylotic myelopathy. Methods A retrospective analysis was conducted on 37 patients diagnosed with cervical spondylotic myelopathy who underwent single-level ACCF using either self-stabilizing zero-profile 3D-printed artificial vertebral bodies (n=15, treatment group) or conventional 3D-printed artificial vertebral bodies with titanium plates (n=22, control group) between January 2022 and February 2023. There was no significant difference in age, gender, lesion segment, disease duration, and preoperative Japanese Orthopedic Association (JOA) score between the two groups (P>0.05). Operation time, intraoperative bleeding volume, hospitalization costs, JOA score and improvement rate, incidence of postoperative prosthesis subsidence, and interbody fusion were recorded and compared between the two groups. Results Compared with the control group, the treatment group had significantly shorter operation time and lower hospitalization costs (P<0.05); there was no significant difference in intraoperative bleeding volume between the two groups (P>0.05). All patients were followed up, with a follow-up period of 6-21 months in the treatment group (mean, 13.7 months) and 6-19 months in the control group (mean, 12.7 months). No dysphagia occurred in the treatment group, while 5 cases occurred in the control group, with a significant difference in the incidence of dysphagia between the two groups (P<0.05). At 12 months after operation, both groups showed improvement in JOA scores compared to preoperative scores, with significant differences (P<0.05); however, there was no significant difference in the JOA scores and improvement rate between the two groups (P>0.05). Radiographic examinations showed the interbody fusion in both groups, and the difference in the time of interbody fusion was not significant (P>0.05). At last follow-up, 2 cases in the treatment group and 3 cases in the control group experienced prosthesis subsidence, with no significant difference in the incidence of prosthesis subsidence (P>0.05). There was no implant displacement or plate-screw fracture during follow-up.Conclusion The use of self-stabilizing zero-profile 3D-printed artificial vertebral bodies in the treatment of cervical spondylotic myelopathy not only achieves similar effectiveness to 3D-printed artificial vertebral bodies, but also reduces operation time and the incidence of postoperative dysphagia.
Objective To analyze the changes of gene expression profiles during the process that human bonemarrow mesenchymal stem cells (hBMSCs) are induced to differentiate into cardiomyogenic cells with 5-azacytidine (5-aza). Methods hBMSCs were isolated from marrow of obsolete ribs and induced with 5-aza. Then immunocytochemicalstaining was used to detect the expressions of α-actin, cardiac troponin T (cTnT), and connexin 43, and the percentage ofcTnT positive cells was tested with flow cytometry. In the process of differentiation, variation of gene expression was screenedwith Genechi ps Operating System of human gene expression profiles. And the differentially expressed genes were functionallyanalyzed and hierarchical clustered. Results When BMSCs were induced in vitro with 5-aza, part of the cells turnedinto myogenic cells morphologically. Before induction, immunocytochemical staining for α-actin and cTnT showed sl ightpositive and for connexin 43 showed negative. While after 3 weeks of induction, immunocytochemical staining for α-actin,cTnT, and connexin 43 showed all positive. With flow cytometry, the percentage of cTnT positive cells was 7.43% ± 0.02%before induction, but it was 49.64% ± 0.05% after induction. During differentiation, 1 814 differentially expressed geneswere reported by gene chi ps. Of them, 647 genes were divided into 5 groups with hierarchical clustering. They had variousbiological functions, involving signal transduction, cell metabol ism, prol iferation, differentiation, development, andtopogenesis. Conclusion hBMSCs can differentiate into cardiomyogenic cells with the induction of 5-aza in vitro. Multi plegenes related with signal transduction, transcri ption, and growth factors are involved during this process.
There is a shared problem in current optical imaging technologies of how to obtain the optical parameters of biological tissues with complex profiles. In this work, an imaging system for obtaining the optical parameters of biological tissues with complex profile was presented. Firstly, Fourier transformation profilometry was used for obtaining the profile information of biological tissues, and then the difference of incident light intensity at different positions on biological tissue surface was corrected with the laws of illumination, and lastly the optical parameters of biological tissues were achieved with the spatial frequency domain imaging technique. Experimental results indicated the proposed imaging system could obtain the profile information and the optical parameters of biological tissues accurately and quickly. For the slab phantoms with height variation less than 30 mm and angle variation less than 40º, the maximum relative errors of the profile uncorrected optical parameters were 46.27% and 72.18%, while the maximum relative errors of the profile corrected optical parameters were 6.89% and 10.26%. Imaging experiments of a face-like phantom and a human’s prefrontal lobe were performed respectively, which demonstrated the proposed imaging system possesses clinical application value for the achievement of the optical parameters of biological tissues with complex profiles. Besides, the proposed profile corrected method can be used to combine with the current optical imaging technologies to reduce the influence of the profile information of biological tissues on imaging quality.
The impeller profile, which is one of the most important factors, determines the creation of shear stress which leads to blood hemolysis in the internal flow of centrifugal blood pump. The investigation of the internal flow field in centrifugal blood pump and the estimation of the hemolysis within different impeller profiles will provide information to improve the performance of centrifugal blood pump. The SST κ-ω with low Reynolds correction was used in our laboratory to study the internal flow fields for four kinds of impellers of centrifugal blood pump. The flow fields included distributions of pressure field, velocity field and shear stress field. In addition, a fast numerical hemolysis approximation was adopted to calculate the normalized index of hemolysis (NIH). The results indicated that the pressure field distribution in all kinds of blood pump were reasonable, but for the log spiral impeller pump, the vortex and backflow were much lower than those of the other pumps, and the high shear stress zone was just about 0.004%, and the NIH was 0.0089.
The dose data produced by treatment plan system (TPS) in intensity-modulated radiation therapy (IMRT) has many gradient edge points. Considering this feature we proposed a new interpolation algorithm called treatment plan dose interpolation algorithm based on gradient feature in intensity-modulated radiation therapy (TDAGI), which improves the Canny algorithm to detect the gradient edge points and non-edge points by using the gradient information in the dose data plane. For each gradient edge point, the corresponding gradient profile was traced and the profile's sharpness was calculated, and for each non-edge point, the dispersion was calculated. With the sharpness or dispersion, the kernel coefficients of bi-cubic interpolation can be obtained and can be used as the central point to complete the bi-cubic interpolation calculation. Compared with bi-cubic interpolation and bilinear interpolation, the TDAGI algorithm is more accurate. Furthermore, the TDAGI algorithm has the advantage of gradient keeping. Therefore, TDAGI can be used as an alternative method in the dose interpolation of TPS in IMRT.
To investigate the mechanism of cAMP/Ca2+ signaling pathway inducing bone marrow mesenchymal stem cells to differentiate into neuronal cells, we cultured the bone marrow mesenchymal stem cells D1 cells in the present study. D1 cells were divided into two groups: control group and salidroside inducing groups. Control group was cultured with complete culture solution D/F12, while salidroside inducing groups were induced with 100 mg·L–1 salidroside for different time periods (24, 48 and 72 hours). PCR-array assay was used to detect expression of 84 calcium related mRNA, and significantly different genes were chosen to analyse. As a result, there were 4 significantly upregulated mRNAs inclu-ding DNA damage-inducible transcript 3 (Ddit3), heat shock protein 5 (Hspa5), protein phosphatase 1 regulatory subunit (Ppp1r15a) and prostaglandin-endoperoxide synthase 2 (Ptgs-2), and 4 significantly downregulated mRNAs including glucagon (Gcg), interleukin 2 (Il2), tumor necrosis factor (Tnf) and somatostatin (Sst) in the cAMP/Ca2+ signaling pathway. They probably had an effect on the process of salidroside induced D1 cells differentiating into neuronal cells.
ObjectiveTo detect the differentially expressed circular RNA (circRNA) in rotator cuff tendinopathy and analyze the potential molecular mechanism of these parental genes.MethodsTen supraspinatus tendons donated from patients who underwent tendon repair surgery between June 2018 and June 2019 were used for RNA-sequence. All rotator cuff tendinopathy and normal tendon samples were confirmed by MRI, histological staining, and observation by arthroscopy. All pathological tendons were matched with tendon samples for patients’ age, gender, body mass index, and Bonar score. The bioinformatic analysis was performed based on the differentially expressed circRNA and their parental genes, including gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and competing endogenous RNA (ceRNA) network construction.ResultsThere were 94 differentially expressed circRNAs, including 31 up-regulated and 63 down-regulated, detected between the rotator cuff tendinopathy and normal tendon samples with |log2 fold change (FC)| >2, P<0.05. GO analysis showed that the genes were mostly enriched in response to cyclic adenosine monophosphate (cAMP). KEGG pathway analysis showed that the most genes were enriched in extracellular matrix-receptor interaction, protein digestion and absorption, cell cycle, and nuclear factor κB signaling pathway. ceRNA networks showed the interactions among circRNAs, mRNAs, and miRNAs. And circRNA.8951-has-miR-6089-DNMT3B was the most sum max energy.ConclusionThis bioinformatic study reveals several potential therapeutic targets for rotator cuff tendinopathy, which paves the way to better treatment and prevention of this disorder.