OBJECTIVE: To construct tissue engineering bone with bio-derived materials and bone marrow stromal cells (MSCs), and to investigate the effect of allogeneic engineering bone implants on healing of segmental bone defects. METHODS: MSCs being aspirated aseptically from tibial tuberosities of young rhesus monkeys were induced into osteoblasts in vitro and then were cultured and marked with 5-bromo-2-deoxyuridine (BrdU). Tissue engineering bones were constructed with these labeled osteoblasts being seeded onto bio-derived materials made from fresh human bones which were treated physically and chemically, Then the constructs were implanted in 15 allogeneic monkeys to bridge 2.5 cm segmental bone defects of left radius as experimental groups, bio-derived materials only were implanted to bridge same size defects of right radius as control group. and, 2.5 cm segmental bone defects of both sides of radius were left empty in two rhesus monkeys as blank group. Every 3 monkeys were sacrificed in the 1st, 2nd, 3rd, 6th and 12th weeks postoperatively and both sides of the implants samples were examined macroscopically, histologicaly, and immunohistochemicaly. The two monkeys in blank group were sacrificed in the 12th week postoperatively. RESULTS: Apparent inflammatory reactions were seen around both sides of the implants samples in the 1st, 2nd, 3rd weeks, but it weakened in the 6th week and disappeared at the 12th week. The labeled osteoblasts existed at the 6th week but disappeared at the 12th week. The bone defects in experimental group were repaired and the new bone formed in multipoint way, and osteoid tissue, cartilage, woven bone and lamellar bone occurred earlier when compared with control group in which the bone defects were repaired in ’creep substitution’ way. The bone defects in blank group remained same size at the 12th week. CONCLUSIONS: Engineering bones constructed with bio-derived materials and MSCs were capable of repairing segmental bone defects in allogeneic monkeys beyond ’creep substitution’ way and making it healed earlier. Bio-derived materials being constituted with allogeneic MSCs may be a good option in construction of bone tissue engineering.
Objective To review research progress of corneal tissueengineering.Methods The recent articles on corneal tissue engineering focus on source and selection of corneal cells, the effects of growth factors on culture of corneal cells in vitro. The preparation and selection of three-dimensional biomaterial scaffolds and their b and weak points were discussed. Results The corneal tissue engineering cells come from normal human corneal cells. The embryo corneal cell was excellent. Several kinds of growth factors play important roles in culture, growth and proliferation of corneal cell, and incroporated into matrix.Growth factors including basic fibroblast growth factor, keratinocyte growth factor, transforming growth factor β1 and epidermal growth factor was favor to corneal cell. Collagen, chitosan and glycosaninoglycans were chosen as biomaterial scaffolds. Conclusion Human tissue engineering cornea can be reconstructed and transplanted. It has good tissue compatibility and can be used as human corneal equivalents.
In search of a rapid method for vascular anastomosis with high quality,a compatative study was carried out to observe the results of laser welding of the saphenous artery of rabbit(0.45-0.85 indiameter)with the use of a degradable intraluninal bionterial support and the traditional method of suture anastomosis. The results showed that there was no significant difference observed between the two groups in the immediate and long patency rated and the occurrence of stenosis,However,the time ...
Spinal fusion is a standard operation for treating moderate and severe intervertebral disc diseases. In recent years, the proportion of three-dimensional printing interbody fusion cage in spinal fusion surgery has gradually increased. In this paper, the research progress of molding technology and materials used in three-dimensional printing interbody fusion cage at present is summarized. Then, according to structure layout, three-dimensional printing interbody fusion cages are classified into five types: solid-porous-solid (SPS) type, solid-porous-frame (SPF) type, frame-porous-frame (FPF) type, whole porous cage (WPC) type and others. The optimization process of three-dimensional printing interbody fusion cage and the advantages and disadvantages of each type are analyzed and summarized in depth. The clinical application of various types of 3D printed interbody fusion cage was introduced and summarized later. Lastly, combined with the latest research progress and achievements, the future research direction of three-dimensional printing interbody fusion cage in molding technology, application materials and coating materials is prospected in order to provide some reference for scholars engaged in interbody fusion cage research and application.
Objective To investigate the latest development of tissue engineeredregenerative medicine in industrialization, with the intention to direct work in practical area. Methods A complete insight of regenerative medicine in industrialization was obtained through referring to update publications, visiting related websites, as well as learning from practical experience. Results The aerial view of the future of regenerative medicine was got based on knowledge of four different tissue engineering projects. Conclusion All present efforts should be devoted to regenerative medicine area meeting the industrialized trends.
Objective To summarize the developmental process of biomedical materials and regenerative medicine. Methods After reviewing and analyzing the literature concerned, we put forward the developmental direction of biomedical materials and regenerative medicine in the future. Results Biomedical materials developed from the first and second-generations to the third-generation in the 1990s. Regenerative medicine was able to help the injured tissues and organs to be regenerated by the use of the capability of healing themselves. This kind of medicine included the technologies of the stem cells and the cloning, the tissue engineering, the substitute tissues and organs, xenotransplantation and soon. Conclusion The third-generation biomaterials possess the following two properties: degradation and bioactivity; and they can help the body heal itself once implanted. Regenerative medicine is a rapidly advancing field that opens a new and exciting opportunity for completely revolutionary therapeutic modalities and technologies.
ObjectiveTo review the related studies on the application of nanomaterials in the treatment of osteomyelitis, and to provide new ideas for the research and clinical treatment of osteomyelitis.MethodsThe literature about the treatment of osteomyelitis with nanomaterials at home and abroad in recent years was reviewed and analyzed.ResultsAt present, surgical treatment and antibiotic application are the main treatment options for osteomyelitis. But there are many defects such as antibiotic resistance, residual bone defect, and low effective concentration of local drugs. The application of nanomaterials can make up for the above defects. In recent years, nanomaterials play an important role in the treatment of osteomyelitis by filling bone defects, establishing local drug delivery system, and self-antibacterial properties.ConclusionIt will provide a new idea and an important research direction for the treatment of osteomyelitis to fully study the related characteristics of nanomaterials and select beneficial materials to make drug delivery system or substitute drugs.
OBJECTIVE: From the point of view of material science, the methods of tissue repair and defect reconstruct were discussed, including mesenchymal stem cells (MSCs), growth factors, gene therapy and tissue engineered tissue. METHODS: The advances in tissue engineering technologies were introduced based on the recent literature. RESULTS: Tissue engineering should solve the design and preparation of molecular scaffold, tissue vascularization and dynamic culture of cell on the scaffolds in vitro. CONCLUSION: Biomaterials play an important role in the tissue engineering. They can be used as the matrices of MSCs, the delivery carrier of growth factor, the culture scaffold of cell in bioreactors and delivery carrier of gene encoding growth factors.
ObjectiveTo analyze the progress in biological tissue engineering scaffold materials and the clinical application, as well as product development status. MethodsBased on extensive investigation in the status of research and application of biological tissue engineering scaffold materials, a comprehensive analysis was made. Meanwhile, a detailed analysis of research and product development was presented. ResultsConsiderable progress has been achieved in research, products transformation, clinical application, and supervision of biological scaffold for tissue engineering. New directions, new technology, and new products are constantly emerging. With the continuous progress of science and technology and continuous improvement of life sciences theory, the new direction and new focus still need to be continuously adjusted in order to meet the clinical needs. ConclusionFrom the aspect of industrial transformation feasibility, acellular scaffolds and extracellular matrix are the most promising new growth of both research and product development in this field.
Objective To explore the histological changes of bio-derived bone prepared by different methods after implantation, and to provide the scaffold material from xenogeneic animal for tissue engineering. Methods Theextremities of porcine femur were cut into 0.5 cm×0.5 cm×0.5 cm. Then they were divided into 5 groups according to different preparation methods: group A was fresh bone just repeatedly rinsed by saline; group B was degreased; group C was degreased and decalcificated; group D was degreased, acellular and decalcificated; group E wasdegreased and acellular. All the materials were implantated into femoral muscle pouch of rabbit after 25 kGy irradiation sterilization. The cell counting ofinflammatory cells and osteoclasts, HE and Masson staining, material degradation, collagen and new bone formation were observed at 2, 6, and 12 weeks postoperatively. Results The residue level of trace element in biomaterials prepared by different methods is in line with the standards. All the animals survived well. There were no tissue necrosis, fluid accumulation or inflammation at all implantation sites at each time point. The inflammatory cells counting was most in group A, and there was significant difference compared with other groups(P＜0.05). There was no significant difference in osteoclasts counting among all groups. For the index of HE and Masson staining, collagen and new bone formation, groups C and D were best, group E was better, and groups A and B were worse. Conclusion The degreased, acellular and decalcificated porcine bone is better in degradation,bone formation, and lower inflammatory reaction, it can be used better scaffold material for tissue engineered bone.