Objective To investigate the short-term effectiveness of reconstructive locked plate for treating sternoclavicular joint dislocation. Methods Between February 2008 and February 2012, 11 patients with sternoclavicular joint dislocation were treated with reconstructive locked plate, and the clinical data were retrospectively analyzed. There were 7 males and 4 females, aged 30-55 years (mean, 44 years). The causes of injury included traffic accident in 8 cases and crashing in 3 cases. The disease duration ranged from 2 hours to 11 days (median, 6 days). All patients had anterior dislocation of sternoclavicular joint. According to the Grade system, there were 2 cases of type II and 9 cases of type III. Results All patients obtained healing of incisions by first intention after operation. There was no neurovascular injury. The X-ray films showed that satisfactory reduction of joint dislocation and stable internal fixation were obtained at 2 days after operation. All patients were followed up 9-24 months (mean, 16 months). According to the Rockwood criteria, the score was 10-15 (mean, 13.2); the results were excellent in 9 cases and good in 2 cases, with an excellent and good rate of 100% at 9 months after operation. No internal fixation failure or re-dislocation occurred. All internal fixators were removed at 9-15 months after operation. Both the stability and the functions of the shoulder joint were good. Conclusion The reconstructive locked plate in treating sternoclavicular joint dislocation has the advantages of good stability and satisfactory reduction, and the patients can do functional exercises early and obtain good recovery of the shoulder joint function. The short-term effectiveness is satisfactory.
ObjectiveTo develop an instrument for sacroiliac joint fixation with less injury and less complications. MethodsFirstly, 18 adult pelvic specimens (8 males and 10 females) were used to measure the anatomical data related to the locking plates and locking screws on the sacrum and ilium, and the polyaxial locking plate screw system of the sacroiliac joint was designed according to the anatomic data. This system was made of medical titanium alloy. Then 4 adult male plevic specimens were harvested and the experiment was divided into 3 groups:group A (normal pelvic), group B (the dislocated sacroiliac joint fixed with sacroiliac screws), and group C (the dislocated sacroiliac joint fixed with polyaxial locking plate screw system). The vertical displacement of sacroiliac joint under the condition of 0-700 N vertical load and the horizontal displacement on angle under the condition of 0-12 N·m torsional load were compared among the 3 groups by using the biological material test system. Finally, the simulated application test was performed on 1 adult male cadaveric specimen to observe soft tissue injury and the position of the locking plate and screw by X-ray films. ResultsAccording to the anatomic data of the sacrum and ilium, the polyaxial locking plate screw system of the sacroiliac joint was designed. The biomechanical results showed that the vertical displacement of the sacroiliac joint under the condition of 0-700 N vertical load in group A was significantly bigger than that in group B and group C (P < 0.05), but there was no significant difference between group B and group C (P>0.05). The horizontal displacement on angle under the condition of 0-12 N·m torsional load in group A was significantly less than that in group B and group C (P < 0.05). The horizontal displacement on angle under the condition of 0-6 N·m torsional load in group B was bigger than that in group C, and the horizontal displacement on angle under the condition of 6-12 N·m torsional load in group B was less than that in group C, but there was no significant difference between group B and group C (P>0.05). The test of simulating application showed that the specimen suffered less soft tissue injury, and this instrument could be implanted precisely and safely. ConclusionThe polyaxial locking plate screw system of the sacroiliac joint has the advantages of smaller volume and less injury; polyaxial fixation enables flexible adjustment screw direction. The simulated application test shows satisfactory fixing effect.
Objective To summarize operative procedure and the effectiveness of open reduction with internal fixation or radial head replacement for the treatment of Essex-Lopresti injury. Methods Between November 2002 and October 2010, 10 patients with Essex-Lopresti injury were treated. There were 8 males and 2 females with a mean age of 36 years (range, 20-56 years). Eight cases were fresh closed fracture within 2 days. According to Mason classification, 5 fracture were typeII, 3 were type III. The other 2 cases were old fracture within 3 months. Wrist joint X-ray revealed that all the patients had distal radioulnar joint dislocation. Open reduction with internal mini-plate or absorbable screw fixation was performed in 5 cases, and radial head replacement in 5 cases; meanwhile, the distal radioulnar joint was reducted and fixed. Results All incisions healed by first intention without infection or bone nonunion. The patients were followed up 7 to 24 months with an average of 14.7 months. The X-ray films showed fracture heal ing at 9-20 weeks (mean, 16.3 weeks); distal radioulnar joint was stable without shortening or shift of proximal radius. According to elbow cl inical evaluation system, the results were excellent in 5 cases, good in 3 cases, and fair in 2 cases. According to wrist cl inical evaluation, the results were excellent in 7 cases, good in 2 cases, and fair in 1 case. All patients had good elbow stabil ity, and recovered quickly. Conclusion Early diagnosis, operation, and functional exercises are important to obtain an excellent result in treating Essex-Lopresti injury.
Objective To investigate the cl inical efficacy, compl ications and necessity of removing internal fixation in treatment of fresh Tossy type III acromioclavicular joint dislocations and Neer type II distal clavicle fractures with clavicularhook plate. Methods From June 2005 to June 2008, 24 patients with fresh Tossy type III acromioclavicular joint dislocations and 20 patients with fresh Neer type II distal clavicle fractures were treated. There were 32 males and 12 females with an agerange of 18-66 years (38.5 years on average), involving 18 left shoulders and 26 right shoulders. The injury was caused bytraffic accident in 31 cases and by fall ing in 13 cases. The mean time from injury to operation was 4 days (range, 2-8 days). All patients were treated by reduction with clavicular hook plate fixation. The coracoclavicular l igaments were not sutured. The shoulder functions were evaluated according to University of Cal ifornia-Los Angeles (UCLA) score system and analysed before and after removing internal fixation. Results Wound infection occurred in 2 cases 1 week after operation and healed after symptomatic managment, the other incisions healed by first intention. One case accepted hook plate fixation again because of loosening hooking-up 1 week after operation. One case accepted hook plate removal and Kirschner wire fixation because of severe shoulder’s pain on the postoperative third day. Thirty-eight patients were followed up for 8-32 months (18 months on average), there was no plate breakage. Clavicle fractures got bony union after 3-6 months (4.2 months on average). At last followup (before plate removal), according to UCLA shoulder function score system, the results were excellent in 11 cases, good in 22 cases, and fair in 5 cases; the excellent and good rate was 86.8%. Because of shoulder’s pain, plates were removed in 20 patients 3-16 months (10 months on average) after operation. The cases were followed up 3-8 months (5 months on average) after removing plate. No dislocation and fracture occurred again. There was statistically significant difference (P lt; 0.01) in the functional scores of shoulder between before (30.55 ± 4.00) and after removing internal fixation (33.85 ± 1.95). Conclusion Clavicular hook plate fixation is an effective treatment for fresh Tossy type III acromioclavicular joint dislocations and Neer type II distal claviclefractures. Normative operating, correct plate moulding, functional rehabil itation after operation are key factors in preventingcompl ications and reaching good cl inical efficacy. For the patients with postoperative symptoms, the plate should be removed to improve the shoulder’s function.
Objective To investigate the effectiveness of TightRope system combined with Locking-Loop biplane anatomical reconstruction technique in the treatment of acute acromioclavicular joint dislocation. Methods A clinical data of 28 patients with acute acromioclavicular joint dislocation who met the selection criteria and admitted between June 2018 and December 2021 was retrospectively analyzed. There were 18 males and 10 females, with an average age of 47.7 years (range, 22-72 years). The causes of injury included falling (13 cases) and traffic accidents (15 cases). The acromioclavicular joint dislocation was rated as Rockwood type Ⅲ in 7 cases, type Ⅳ in 16 cases, and type Ⅴ in 5 cases. The time from injury to operation was 4-13 days, with an average of 9.5 days. The acromioclavicular joint dislocation was reconstructed with TightRope system and high-strength wire by Locking-Loop methods during operation. The operation time and complications were recorded. Visual analogue scale (VAS) score, Constant-Murley score, and active range of motion of shoulder (forward flexion and upward lift, abduction and upward lift, and external rotation) were recorded before operation and at 12 months after operation to evaluate the functional recovery of shoulder. The loss of acromioclavicular joint reduction was assessed by comparing the coracoclavicular distance (CCD) based on the anteroposterior X-ray films at 3 days and 12 months after operation. Results The operation time was 58-100 minutes (median, 85 minutes). All incisions healed by first intention. All patients were followed up 12 months. During follow-up, 2 patients developed shoulder adhesion, which recovered after rehabilitation exercise. At 12 months after operation, the VAS score was significantly lower, the Constant-Murley score was significantly higher, and the range of motion of the shoulder joint (forward flexion and upward lift, abduction and upward lift, and external rotation) significantly increased when compared with preoperative ones (P<0.05). X-ray films showed that the CCD was 8.4 (7.3, 9.4) and 9.2 (8.1, 10.1) mm at 3 days and 12 months after operation, respectively, with a significant difference (Z=−4.665, P<0.001). During follow-up, there was no complication such as infection, titanium plate entrapment, fracture, internal fixation failure, or redislocation. ConclusionThe treatment of acute acromioclavicular joint dislocation with TightRope system combined with Locking-Loop biplane anatomical reconstruction has the advantages of small incision, joint reduction under direct vision, high fixation strength, and low incidence of postoperative complications, which can effectively relieve the pain of patients’ shoulder joint and facilitate the recovery of shoulder joint function.
Objective To investigate the diagnose and treatment of intra-articular fracture of the 5th metacarpale base with carpometacarpal joint dislocation (reverse Bennett fracture). Methods Between January 2008 and March 2012, 26 cases of reverse Bennett fracture were treated. There were 20 males and 6 females, aged 19-48 years (mean, 26 years). The injury causes included boxing injury in 19 cases, falling injury in 3 cases, heavy pound injury in 3 cases, and crushing injury in 1 case. According to Lundeen classification, there were 8 cases of type A, 9 cases of type B, 3 cases of type C, and 6 cases of type D. The time from injury to operation ranged 1-8 days with an average of 4 days. All patients underwent open reduction and internal fixation with Kirschner wires, screws, or plates by L-shaped dorsal incision. Results Primary healing was obtained in all incisions; no infection, hematoma, and necrosis occurred after operation. All patients were followed up with an average time of 12.5 months (range, 8-24 months). X-ray films showed that all fractures healed after 6-8 weeks (mean, 6.5 weeks); no delayed union or nonunion and no the 5th carpometacarpal joint dislocation were observed. Two cases had mild osteoarthritis. According to the upper extremity functional evaluation standard by Hand Surgery Branch of Chinese Medical Association, the results were excellent in 22 cases, good in 3 cases, and fair in 1 case, with an excellent and good rate of 96.2%. Conclusion For patients with reverse Bennett fracture, good results can be obtained if early diagnose is done and appropriate internal fixation is selected.
ObjectiveTo summarize the research progress in the surgical treatment of sternoclavicular joint dislocation. MethodThe literature on the treatment of sternoclavicular joint dislocation was reviewed, summarized, and analyzed. ResultsAt present, the main therapy of sternoclavicular joint dislocation is operation, including the sternoclavicular joint reconstruction, the inner end of the clavicle resection, and internal fixation of the sternoclavicular joint. The internal fixation surgery is the preferred way, which is reliable fixation and in favor of early functional exercise. ConclusionsIt is the current focus of attention to select a reliable fixation that is accord with sternoclavicular joint anatomy and biomechanics.
Objective To analyze the treatment of the sternoclavicular joint dislocation by clavicular hook plate and investigate its cl inical value to find a theropy with more safety and stabil ity. Methods Between January 2003 and January 2007, 15 patients with sternoclavicular joint dislocation were involved, among whom there were 12 males and 3 females, aged 28-45 years old (34 on average). There were 12 cases of fall ing injury and 3 cases of vehicle accident injury. The course of disease was 1-12 hours. A total of 2 cases were on the left side and 13 were on the right side. There were 14 casesof anterior dislocation and 1 of posterior dislocation. Two patients were compl icated by acromioclavicular joint dislocationwith no pneumothorax, and 2 patients had a l ittle pleural effusion without any special treatment. As to the damage degree,according to the Grade system, there were 2 cases of type II and 13 cases of type III. Results All patients’ incisionsobtained heal ing by first intention after operation. The X-ray films showed that the reduction of joint dislocation and thelocation of internal fixation were good. All the 15 patients were followed up for 6-18 months (14 months on average). All cases were scored by Rockwood after the operation to assess the curative effect, with 12 excellent, 2 good and 1 fair. There was no wound infection, neurovascular injury, hemopneumothorax, internal fixation failure, redislocation or other side injuries. The anatomical structure as well as appearances and functions were restored. Conclusion The fixation of clavicular hook plate in treating ternoclavicular joint dislocation has superiority over other methods with more stabil ity, less risk and small chances of cardiovascular injury. Besides, the patients can do functional exercises early and the shoulder joint function can be improved to the maximal degree.
ObjectiveTo evaluate and compare the effectiveness of double Endobutton technique and suture anchor combined Endobutton plate in the treatment of Tossy type Ⅲ acromioclavicular joint dislocation. MethodsBetween May 2010 and March 2014, a retrospective study was preformed on 56 patients with Tossy type Ⅲ acromioclavicular joint dislocation. The coracoclavicular ligament was reconstructed with double Endobutton technique in 31 cases (Endobutton group), and with suture anchor combined Endobutton plate in 25 cases (Anchor group). There was no significant difference in age, gender, injury causes, injury side, associated injury, medical comorbidities, and disease duration between 2 groups (P>0.05). The operation time, medical device expenses, postoperative complications, preoperative and postoperative Constant-Murley scores, and postoperative Karlsson grading of the injured shoulder were compared between 2 groups. ResultsThe average operation time in Endobutton group was significantly greater than that in Anchor group (t=4.285, P=0.000); there was no significant difference in the medical device expenses between 2 groups (t=1.555, P=0.126). Primary healing of incision was obtained in all patients of 2 groups; no early complications of infection and skin necrosis occurred. All patients were followed up 15.6 months on average (range, 11-35 months). During follow-up, some loss of reduction and ectopic ossification in the coracoclavicular gap were observed in 1 case and 6 cases of Endobutton group, respectively. No recurrence of acromioclavicular joint dislocation, implant fixation loosening and broken, and secondary fractures occurred in the other patients. There was significant difference in the incidence of postoperative complications between 2 groups (P=0.013). Constant-Murley scores of the injured shoulder significantly increased at 9 months after operation when compared with preoperative values in 2 groups (P<0.05), but no significant difference was observed between 2 groups (P>0.05). At last follow-up, there was no significant difference in Karlsson grading between 2 groups (Z=-0.628, P=0.530). ConclusionBoth double Endobutton technique and suture anchor combined Endobutton plate have good effectiveness in the treatment of Tossy type Ⅲ acromioclavicular joint dislocation. But the latter is associated with easier operation, less operation time, and less complications.
ObjectiveTo investigate the short-term effectiveness of arthroscopic assisted double Endobutton “8” buckle fixation in the treatment of Rockwood Ⅲ type acute acromioclavicular joint dislocation.MethodsThe clinical data of 12 patients with Rockwood Ⅲ type acute acromioclavicular joint dislocation who were treated with arthroscopic assisted double Endobutton “8” buckle fixation between June 2016 and June 2019 were analyzed retrospectively. There were 8 males and 4 females, with an average age of 47.0 years (range, 36-58 years). There were 4 cases of left shoulder and 8 cases of right shoulder. The causes of injury included traffic accident injury in 7 cases and falling injury in 5 cases. The average time from injury to operation was 5.0 days (range, 3-14 days). Before operation and at last follow-up, the shoulder joint activity was recorded; the improvements of function and pain were evaluated by Constant score and visual analogue scale (VAS) score, respectively; the reduction was evaluated by measuring the coracoid spacing of the affected side on the anteroposterior X-ray film of shoulder joint.ResultsAll 12 cases were followed up 6-36 months, with an average of 20.6 months. All the incisions healed by first intention. There was no complications such as clavicle and coracoid fractures and Endobuton displacement. At last follow-up, the range of motion of the abduction improved from preoperative (77.5±4.5)° to (162.5±6.5)°, the range of motion of forward flexion improved from (84.1±5.2)° to (169.5±5.8)°, the Constant score improved from 42.5±2.3 to 92.4±2.3, the VAS score improved from 5.4±0.8 to 0.6±0.5, and the coracoid spacing reduced from (20.5±1.4) mm to (9.2±0.6) mm, all showing significant differences (P<0.05).ConclusionArthroscopic assisted double Endobutton “8” buckle fixation for the treatment of Rockwood Ⅲ type acute acromioclavicular joint dislocation is safe, less invasive, and quicker recovery. It can effectively alleviate shoulder pain, significantly improve the mobility of the shoulder joint, and achieve good short-term effectiveness.