Objective To understand the value of pre-coating in artificial vessel endothelialization. Methods Literature concerning precoating in artificial vessel endothelialization was extensively reviewed. Results Pre-coating included chemical coatings(collagen, fibronectin, laminin, poly-l-lysin, gelatin andextracellular matrix), pre-clotting(plasma, blood, serum and fibrin glue), chemical bonding (heparin, RGD and lectins) and surface modification. Most of them could enhance the adhesion of the endothelial cells. Conclusion Pre-coating couldimprove endothelialization, but further research is needed to search for the appropriate concentration and incubation time.
Coronary stents have been improved in materials, design, coating and antiproliferative drugs in many aspects, but at present, coronary stents still have long-term chronic inflammatory reaction and new atherosclerosis, leading to coronary vasomotor dysfunction, thrombosis and restenosis. In order to address the limitations of current coronary stents, the latest preclinical and clinical studies have evaluated the feasibility of novel bioabsorbable metal stents, including novel bioabsorbable alloys and novel bioabsorbable metal coatings. The purpose of this article is to summarize the latest research results on coronary bioabsorbable metal stents and provide a reference for the clinical application.
Implantation of drug-eluting stents (DES) is one of the most effective treatment for intraluminal vascular diseases such as vascular stenosis caused by atherosclerosis. Antiproliferative drugs offered by could significantly reduce the restenosis of blood vessels, which is beneficial to interventional therapy in more advanced and complex vascular diseases. This review sumarizes the state-of-the-art of the DES based on the function of loaded drug and material of the stents. We hope this review can provide basic information of DES for clinicians and researchers to make more rational choices in practical applications. Moreover, this review also propses the prospects of drug-loaded stents.
Objective To investigate the research progress of drug-loaded antibacterial coating of orthopedic metal implants in recent years. Methods The recent literature on the drug-loaded antibacterial coating of orthopedic metal implants were reviewed. The research status, classification, and development trend of drug-loaded antibacterial coating were summarized. Results The drug-loaded antibacterial coating of orthopedic metal implants can be divided into passive release type and active release type according to the mode of drug release. Passive drug release coating can release the drug continuously regardless of whether the presence of bacteria around the implants. Active drug release coating do not release the drug unless the presence of bacteria around the implants. Conclusion The sustained and stable release of drugs is a key problem to be solved in various antibacterial coatings research. The intelligent antibacterial coating which release antibiotics only in the presence of bacteria is the future direction of development.
A diblock copolymer, poly(ethylene glycol) methacrylate-block-glycidyl methacrylate (PEGMA-GMA), was prepared on glass substrate by surface-initiated atom transfer radical polymerization (SI-ATRP), and endothelial specific peptide Arg-Glu-Asp-Val (REDV) was immobilized at the end of the PEGMA-GMA polymer brush by ring opening reaction through the rich epoxy groups in the GMA. The structure and hydrophilicity of the polymer brushes were characterized by static water contact angle, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The results showed that the REDV modified copolymer brushes were successfully constructed on the glass substrates. The REDV peptide immobilized onto surface was quantitatively characterized by ultraviolet–visible spectroscopy (UV-VIS). The blood compatibility of the coating was characterized by recalcification time and platelet adhesion assay. The results showed that the polymer coating had good blood compatibility. The multifunctional active polymer coating with PEGMA and peptide produced an excellent prospect in surface construction with endothelial cells selectivity.
Compound Huangbai liquid coating agent is a preparation that combines multiple traditional Chinese medicinal herbs and has shown significant efficacy in burn treatment. In recent years, the application of this coating agent in burn treatment has received widespread attention, and it plays a role in promoting wound healing, preventing infection, and reducing patient pain. This article reviews the research progress of compound Huangbai liquid coating agent in burn treatment, explores its mechanism of promoting wound healing, evaluates its current advantages and limitations in burn treatment, and provides scientific basis and theoretical support for its better use in burn treatment.
Objective To investigate the physicochemical properties of pure titanium surface grafted with chlorhexidine (CHX) by phenolamine coating, and to evaluate its antibacterial activity and osteoblast-compatibility in vitro. MethodsControl group was obtained by alkali and thermal treatment, and then immersed in the mixture of epigallocatechin-3-gallate/hexamethylene diamine (coating group). Phenolamine coating was deposited on the surface, and then it was immersed in CHX solution to obtain the grafted surface of CHX (grafting group). The surface morphology was observed by scanning electron microscope, the surface element composition was analyzed by X-ray photoelectron spectroscopy, and the surface hydrophilicity was measured by water contact angle test. Live/dead bacterial staining, nephelometery, and inhibition zone method were executed to evaluate the antibacterial property. Cytotoxicity was evaluated by MTT assay and cell fluorescence staining. Bacteria-MC3T3-E1 cells co‐culture was conducted to evaluate the cell viability on the samples under the circumstance with bacteria. Results Scanning electron microscope observation results showed that deposits of coating group and grafting group increased successively and gradually covered the porous structure. X-ray photoelectron spectroscopy results showed the peak of N1s enhanced and the peak of Cl2p appeared in grafting group. Water contact angle test results showed that the hydrophilic angle of three groups increased in turn, and there was significant difference between groups (P<0.05). Live/dead bacteria staining results showed that the grafting group had the least amount of bacteria adhered to the surface and the proportion of dead bacteria was high. The grafting group had a transparent inhibition zone around it and the absorbance (A) value did not increase, showing significant difference when compared with control group and coating group (P<0.05). MTT assay and cell fluorescence staining results showed that the number of adherent cells on the surface of the grafting group was the least, but the adherent cells had good proliferation activity. Bacteria-cell co-culture results showed that there was no bacteria on the surface of grafting group but live cells adhered well. ConclusionCHX-grafted phenolamine coating has the ability to inhibit bacterial adhesion and proliferation, and effectively protect cell adhesion and proliferation in a bacterial environment.
Objective To design and construct a graphene oxide (GO)/silver nitrate (Ag3PO4)/chitosan (CS) composite coating for rapidly killing bacteria and preventing postoperative infection in implant surgery. Methods GO/Ag3PO4 composites were prepared by ion exchange method, and CS and GO/Ag3PO4 composites were deposited on medical titanium (Ti) sheets successively. The morphology, physical image, photothermal and photocatalytic ability, antibacterial ability, and adhesion to the matrix of the materials were characterized. Results The GO/Ag3PO4 composites were successfully prepared by ion exchange method and the heterogeneous structure of GO/Ag3PO4 was proved by morphology phase test. The heterogeneous structure formed by Ag3PO4 and GO reduced the band gap from 1.79 eV to 1.39 eV which could be excited by 808 nm near-infrared light. The photothermal and photocatalytic experiments proved that the GO/Ag3PO4/CS coating had excellent photothermal and photodynamic properties. In vitro antibacterial experiments showed that the antibacterial rate of the GO/Ag3PO4/CS composite coating against Staphylococcus aureus reached 99.81% after 20 minutes irradiation with 808 nm near-infrared light. At the same time, the composite coating had excellent light stability, which could provide stable and sustained antibacterial effect. ConclusionGO/Ag3PO4/CS coating can be excited by 808 nm near infrared light to produce reactive oxygen species, which has excellent antibacterial activity under light.
Objective To prepare silver-containing hydroxyapatite coating (hydroxyapatite/Ag, HA/Ag) and investigate its antibacterial property and biocompatibil ity in vitro. Methods Vacuum plasma spraying technique was adopted to prepare HA/Ag coating on titanium alloy substrate (3% Ag). After incubating the HA/Ag and the HA coating under staphylococcus aureus and pseudomonas aeruginosa suspensions of 2% tryptic soy broth (TBS) medium for 2, 4 and 7 days, respectively, the biofilm on the coatings was examined by confocal laser scanning microscope, and the bacterial density and viable bacterial percentage of bacterial biofilm were calculated. Meanwhile, the micro-morphology of bacterial biofilm was observed by SEM, the cytotoxicity was detected via MTT and the biocompatibil ity of biofilm was evaluated by acute aemolysis test. Results Compared with HA coating, the bacterial biofilm’s thickness on the surface of HA/Ag coating witnessed no significant difference at 2 days after culture (Pgt; 0.05), but decreased obviously at 4 and 7 days after culture (P lt; 0.01). The bacterial density of the biofilm increased with time, but there was no significant difference between two coatings (P gt; 0.05) at 2, 4 and 7 days after culture. The viable bacterial percentage of the biofilms on the surface of HA/Ag coating decreased obviously compared with that of HA coating at 2, 4 and 7 days after cultureP lt; 0.01). The MTT notified the cytotoxic grade of both coatings was zero. The acute haemolysis assay showed that the hemolytic rate of HA/Ag and HA coating was 0.19% and 0.12%, respectively. Conclusion With good biocompatibil ity, significant antibacterial property against staphylococcus aureus and pseudomonas aeruginosa, no obvious cytotoxicity and no erythrocyte destruction, the vacuum plasma sprayed HA/Ag coating is a promising candidate for the surface of orthopedic metal implants to improve their osseointegration and antibacterial property.
Objective Surface modification of nitinol (NiTi) shape memory alloy is an available method to prevent nickel ion release and coating with titanium-niobium (TiNb) alloy will not affect the superelasticity and shape memory of NiTi. To evaluate the bone histocompatibil ity of NiTi shape memory alloy implants coated by TiNb in vivo. Methods NiTi memory alloy columns which were 4 mm in diameter and 12 mm in length were coated with Ti (Ti-coating group) and TiNb alloy (TiNb-coating group) respectively by magnetron sputtering technique. And NiTi group were not coated on the surface. Fifteen mongrel dogs were divided into 3 groups randomly with 5 dogs in each group. NiTi, Ti-coating and TiNb-coating columns were implanted into the lateral femoral cortex of each group, respectively. There were 10 columns embedded in eachdog’s femur whose distance was 1.0 cm to 1.5 cm from each other. The materials were obtained 12 months after operation. After X-ray photography, only those columns which were perpendicular to the cortex of the femur shaft were selected for subsequent analysis. Push-out tests were performed to attain the maximum shear strength (the number of specimens of TiNi group, Ticoating group, and TiNb-coating group were 12, 10, and 14, respectively). Undecalcified sections were used for histological observation and the calculation of osseointegration rate (the number of specimens of TiNi group, Ti-coating group, and TiNb-coating group were 8, 5, and 10, respectively). Results The maximum shear strength of Ti-coating group (95.10 ± 10.03) MPa, and TiNb-coating group (91.20 ± 15.42) MPa were significantly higher than that of NiTi group (71.60 ± 14.24) MPa (P lt; 0.01). Gimesa staining showed that no obvious macrophage and inflammation cell was observed in 3 groups. The osseointegration rates of NiTi group, Ti-coating group, and TiNb-coating group were (21.30% ± 0.23%), (32.50% ± 0.31%), and (38.60% ± 0.58%), respectively; there were significant differences among 3 groups (P lt; 0.01). Conclusion The implants of 3 groups all have good bone histocompatabil ity. But the osseointegration rate and the shear strength in the Ti-coating group and the TiNb-coating group were better than those in the NiTi group, the TiNb-coating group is the best among them.