ObjectiveTo investigate the bone regeneration potential of cell-tissue engineered bone constructed by human bone marrow mesenchymal stem cells (hBMSCs) expressing the transduced human bone morphogenetic protein 2 (hBMP-2) gene stably. MethodsThe full-length hBMP-2 gene was cloned from human muscle tissues by RT-PCR and connected into a vector to consturct a eukaryotic expression system. And then the gene expression system was transduced to hBMSCs with lipidosome. hBMSCs were transfected by hBMP-2 gene (experimental group) and by empty plasmid (negative control group), untransfected hBMP-2 served as blank control group. RT-PCR, dot-ELISA, immunohistochemical analysis and ALP activity were performed to compare and evaluate the situation of hBMP-2 expression and secretion after transfection. hBMSCs transfected by hBMP-2 gene were seeded on hydroxyapatite (HA) and incubated for 4 days to construct the hBMP-2 gene modified tissue engineered bone, and then the tissue engineered bone was observed by the inverted phase contrast microscope and scanning electron microscope. Then the hBMP-2 gene modified tissue engineered bone (group A, n=3), empty plasmid transfected hBMSCs seeded on HA (group B, n=3), hBMSCs suspension transfected by hBMP-2 gene (group C, n=3), and hBMP-2 plasmids and lipidosome (group D, n=3) were implanted into bilateral back muscles of nude mice. The osteogenic activity was detected by HE staining and alcian blue staining after 4 weeks. ResultsAt 48 hours and 3 weeks after transfection, RT-PCR and dot-ELISA results indicated that the transfected hBMSCs could express and secrete active and exogenous hBMP-2 stably. The immunohistochemical staining was positive, and the ALP activity in the transfected hBMSCs was significantly higher than that in two control groups (P < 0.05). The transfected hBMSCs had a good attaching and growing on the three-demension suface of HA under inverted phase contrast microscope and scanning electron microscope. In vivo study indicated that a lot of new bone formation was obviously found at 4 out of 6 sides of back muscles in group A. Some new bone formation at both sides of back muscles was observed in 1 of 3 mice in group B. No new bone formation was found in group C. A few new bone formation was observed at one side of back muscles in group D. ConclusionThe tissue engineered bone constructed by hBMP-2 gene modified hBMSCs and HA is able to express and secrete active hBMP2 stably and can promote new bone formation effectively in muscles of nude mice.
Objective To study the vascularization of the compositeof bio-derived bone and marrow stromal stem cells(MSCs) in repairing goat tibial shaft defect.Methods Bio-derived bone was processed as scaffold material. MSCs were harvested and cultured in vitro. The multiplied and induced cells were seeded onto the scaffold to construct tissue engineered bone. A 20 mm segmental bone defect inlength was made in the middle of the tibia shaft in 20 mature goats and fixed with plate. The right tibia defect was repaired by tissue engineered bone (experimental side), and the left one was repaired by scaffold material (control side).The vascularization and osteogenesis of the implants were evaluated by transparent thick slide, image analysis of the vessels, and histology with Chinese ink perfusion 2, 4, 6, and 8 weeks after operation.Results More new vessels were found in control side than in experimental side 2 and 4 weeks after implantation (Plt;0.05). After 8 weeks, there was no significant difference in number of vessels between two sides(Pgt;0.05), and the implants were vascularized completely. New bone tissue was formed gradually as the time and the scaffold material degraded quickly after 6 and 8 weeks in the experimental side. However, no new bone tissue was formed andthe scaffold degraded slowly in control side 8 weeks after operation.Conclusion Bio-derived bone has good quality of vascularization. The ability of tissue-engineered bone to repair bone defect is better than that of bio-derived bone alone.
OBJECTIVE: To explore a new method of preparing the composite of DL-polylactic acid (PDLLA), hydroxyapatite(HA), decalcium bone matrix (DBM), and to observe the degradation characteristics of PDLLA/HA/DBM in vitro. METHODS: An emulsion blend method was developed to prepare the composite of PDLLA/HA/DBM based on the weight rate of PDLLA:HA:DBM = 1.5-2:1-1.5:1. The characteristics of the particles was observed by scanning electron microscope. In vitro, PDLLA/HA/DBM and PDLLA were put into PBS(pH7.4) respectively; the pH value, weight and biomechanics of them were determined during the degradation. RESULTS: Without heating, the emulsion blend method could be developed to prepare PDLLA/HA/DBM. Scanning electron microscope showed that the gap diameter in the compound material was 100 to 400 microns, and the porosity was 71.3%; During degradation, the pH value of PDLLA decreased little within 2 weeks, then decreased obviously and decreased to 4.0 at the end of the 4th week; while the pH value of PDLLA/HA/DBM kept quite steady and was 6.4 at the end of the 12th week. The weight of PDLLA decreased little within 4 weeks, then decreased obviously and remained 50% of its prime weight at the end of the 12th week; while the weight of PDLLA/HA/DBM decreased little within 5 weeks, then decreased obviously and remained 60% of the prime at the end of the 12th week. The prime biomechanical strength was 1.33 MPa in PDLLA and 1.71 MPa in PDLLA/HA/DBM. There was significant difference between them (P lt; 0.05). The strength of PDLLA decreased little within 3 weeks, then decrease obviously and was 0.11 MPa at the end of the 12th week; the strength of PDLLA/HA/DBM decreased little within 4 weeks, then decrease obviously and was 0.21 MPa at the end of the 12th week. CONCLUSION: The emulsion blend method is a new method to prepare bone repair materials. As a new bone repair material, PDLLA/HA/DBM is suitable for bone tissue engineering for its good characteristics of porosity and degeneration.
To summarize the medium-term cl inical result of bio-derived bone transplantation in orthopedics with tissue engineering technique. Methods From December 2000 to June 2001, 10 cases of various types of bone defect were treated with tissue engineered bone, which was constructed in vitro by allogenous osteoblasts from periosteum (1 × 106/ mL) with bio-derived bone scaffold following 3 to 7 days co-culture. Six men and 4 women were involved in this study, aged from 14 to 70 years with a median of 42 years. Among them, there were 2 cases of bone cyst, 1 case of non-union of old fracture, 6 cases of fresh comminuted fracture with bone defect, and 1 case of chronic suppurative ostemyel itis. The total weight of tissue engineered bone was 3-15 g in all the cases, averaged 7.3 g in each case. Results The wound in all the case healed by first intention. For 7 year follow up, bone union was completed within 3.0 to 4.5 months in 9 cases, but loosening occurred and the graft was taken out 1 year after operation in 1 case. The X-ray films showed that 9 cases achieved union except one who received resection of the head of humerus. No obvious abnormities were observed, and the function of affected l imbs met daily l ife and work. Conclusion Bio-derived tissue engineered bone has good osteogenesis. No obvious rejection and other compl ications are observed in the cl inical appl ication.
Objective To explore the histological changes of bio-derived bone prepared by different methods after implantation, and to provide the scaffold material from xenogeneic animal for tissue engineering. Methods Theextremities of porcine femur were cut into 0.5 cm×0.5 cm×0.5 cm. Then they were divided into 5 groups according to different preparation methods: group A was fresh bone just repeatedly rinsed by saline; group B was degreased; group C was degreased and decalcificated; group D was degreased, acellular and decalcificated; group E wasdegreased and acellular. All the materials were implantated into femoral muscle pouch of rabbit after 25 kGy irradiation sterilization. The cell counting ofinflammatory cells and osteoclasts, HE and Masson staining, material degradation, collagen and new bone formation were observed at 2, 6, and 12 weeks postoperatively. Results The residue level of trace element in biomaterials prepared by different methods is in line with the standards. All the animals survived well. There were no tissue necrosis, fluid accumulation or inflammation at all implantation sites at each time point. The inflammatory cells counting was most in group A, and there was significant difference compared with other groups(P＜0.05). There was no significant difference in osteoclasts counting among all groups. For the index of HE and Masson staining, collagen and new bone formation, groups C and D were best, group E was better, and groups A and B were worse. Conclusion The degreased, acellular and decalcificated porcine bone is better in degradation,bone formation, and lower inflammatory reaction, it can be used better scaffold material for tissue engineered bone.
Objective To evaluate repair of critical-sized cranialdefect with tissue engineered bone fabricated by coral, bone mesenchymal stem cells(MSCs) and sustainedly released recombinant human bone morphogenetic -protein 2 (rhBMP-2) by collagen. Methods Three scaffolds of rhBMP-2+coral,collagen+rhBMP-2+coral and MSCs+collagen+rhBMP-2+coral were fabricated. Forty New Zealand rabbits were made the models of critical-sized defects and divided into5 groups according to different implants: group Ⅰ, auto-ilium; group Ⅱ,coral; group Ⅲ, rhBMP-2+coral; grop Ⅳ, collagen+rhBMP-2+coral; and group Ⅴ,MSCs+collagen+rhBMP-2+coral. Repair of bone defect was evaluated after 8 and 16 weeks of implantation by gross obeservation, X-ray,HE staining and Masson’s trichrome staining. Results Repair ofbone defect in group Ⅴ was similar to that in group Ⅰ, andwas better than that in group Ⅳ; and group Ⅲ was worse. The gross appearance showed that defect region filled with bony tissue which had similar strength to adjacent bone and formed bone union with surrounding bone. The X-ray result displayed high radiopacity(80.45%±2.52% in the 16thweek). Histological observation showed new lamellar bone tissue and with few pore blank area. However, only transpasent fibrous tissue filled the defect in group Ⅱ. Conclusion Collagen may be a suitable sustained release system for rhBMP-2. And MSCs may have important effect on enhancing repair of bone defect. Tissueengineered bone fabricated by MSCs+collagen+rhBMP-2+coral may be a useful material for bone defect repair.
OBJECTIVE: To compare the clinical results of repairing bone defect of limbs with tissue engineering technique and with autogeneic iliac bone graft. METHODS: From July 1999 to September 2001, 52 cases of bone fracture were randomly divided into two groups (group A and B). Open reduction and internal fixation were performed in all cases as routine operation technique. Autogeneic iliac bone was implanted in group A, while tissue engineered bone was implanted in group B. Routine postoperative treatment in orthopedic surgery was taken. The operation time, bleeding volume, wound healing and drainage volume were compared. The bone union was observed by the X-ray 1, 2, 3, and 5 months after operation. RESULTS: The sex, age and disease type had no obvious difference between groups A and B. all the wounds healed with first intention. The swelling degree of wound and drainage volume had no obvious difference. The operation time in group A was longer than that in group B (25 minutes on average) and bleeding volume in group A was larger than that in group B (150 ml on average). Bone union completed within 3 to 7 months in both groups. But there were 2 cases of delayed union in group A and 1 case in group B. CONCLUSION: Repair of bone defect with tissue engineered bone has as good clinical results as that with autogeneic iliac bone graft. In aspect of operation time and bleeding volume, tissue engineered bone graft is superior to autogeneic iliac bone.
Objective To observe the ability to repair bilateralradius bone defect with the composite of β-tricalciumphosphate(βTCP),hyaluronic acid(HA),type I collagen(COL-Ⅰ) and induced marrow stromal cells(MSCs), and to investigate the feasibility of the composite as a bone substitute material.Methods The MSCs of the New Zealand white rabbits were induced into ostoblasts, then combined with β-TCP, HA and COL-Ⅰ. Thirty New Zealand white rabbits were made the bilateral radius bone defects of 2 cm and divided into groups A, B and C. After 8 weeks, β-TCP-HA-COL-Ⅰ-MSCs （group A, n=27 sides）, autograft （group B, n=27 sides）andno implant（group C as control, n=6 sides）were implanted into the areas ofbilateral radius bone defects, respectively. The structure of the composite was observed by scanning electron microscope. The repairing effect was observed by gross, histomorphology, X-ray examination, and the degradation rate of inorganic substance at 4, 8 and 12 weeks. The ostogenic area and biomechanics ofgroup A were compared with those of group B at 12 weeks.Results The MSCs could stably grow in vitro, relatively rapidly proliferated, and could be induced into the ostoblasts.The composite was porous. The results of gross, histomorphology and X-ray showed that the bone defects were perfectly repaired in group A and group B, but not in group C. The ostogenic area or biomechanics had no statistically significant difference between groups A and B(Pgt;0.05). The weight of inorganic substance in group A were 75% ,57% and 42% at 4,8,12 weeks, respectively.Conclusion MSCs can be used as seedcells in the bone tissue engineering. The composite has porous structure, no reactions of toxicity to the tissue and rapid degradation, and it is an ideal carrier of seed cells.The β-TCP-HA-COL-Ⅰ-MSCs composite has the high ability of repairing bone defect and can serve as an autograft substitute material.
Objective To observe the tissue engineered bonefabricated with the cultured mesenchymal stem cells (MSCs) by the green fluorescent protein (GFP) gene transfer. Methods The recombinant Adeno-XTM-GFP expression vector was purified after being packed and proliferated by the HEK293 cells, and then it was used to infect the rabbit’s MSCs directly afer the virus titer was assayed. The cell morphological changes were observed under the inverted phase contrast microscope, and the expression of GFP was observed under the fluorescence microscope to confirm success of the labeling of MSCs.The GPFlabeled MSCs and the pure MSCs were cultured together in the conventional osteogenic supplements for 3 weeks, and then they were seeded onto the compound scaffold of the calcium phosphate cement (CPC) and the fibrin glue (FG) to form a new kind of the tissue engineered bone. It was implanted into the donator rabbit subcutaneously to be used as the experimental group; in contrast, the pure compound scaffold of the CPC-FG without any MSCs was implanted in the same rabbit as a control. The alkline phosphatase (ALP) activity assay was performed respectively at 1, 2 and 3 weeks after operation. GFP was observed under the laserconfocal microscope at 4 weeks after operation, and the formed new bone was harvested at 4 weeks and evaluated by the Masson staining, the immunohistochemistry staining of osteocalcin (OC) and collagen typeⅠ.Results The virus titer was 3×108pfu/ml after proliferation and purification. Expresstionof GFP was confirmed 96 h after MSCs were infected by the Adeno-XTM-GFP expression vector and the infection rate was proximally 50%-70%. In contrast to MSCs, division and proliferation of the GPF-labeled MSCs were not significantly different. The ALP activity in the experimental group (12.546±1.091, 16.567±0.659, 20.443±0.706) was significantly higher than that in the control group (0.453±0.113, 0.243±0.018, 0.308±0.056), respectively at 1, 2 and 3 weeks after operation (Plt;0.05). The tissue engineered bone formed at 4 weeks. There were newly-formed trabeculae around the pore of the compound scaffold, and theimmunohistochemistry staining of OC and collagen typeⅠ were positive. The laser confocal microscope revealed that the GFP-labeled cells existed in many newlyformed tissues，and the compound scaffold of CPC-FG was partly degraded. Conclusion The engineered bone is similar to the spongy bone and the composed cells originate from the cultured MSCs, all of which can be confirmed by the GFP gene transfer technique.
Objective To observe the histological structure and cytocompatibility of novel acellular bone matrix (ACBM) and to investigate the feasibility as a scaffold for bone tissue engineering. Methods Cancellous bone columns were harvested from the density region of 18-24 months old male canine femoral head, then were dealt with high-pressure water washing, degreasing, and decellularization with Trixon X-100 and sodium deoxycholate to prepare the ACBM scaffold. The scaffolds were observed by scanning electron microscope (SEM); HE staining, Hoechst 33258 staining, and sirius red staining were used for histological analysis. Bone marrow mesenchymal stem cells (BMSCs) from canine were isolated and cultured with density gradient centrifugation; the 3rd passage BMSCs were seeded onto the scaffold. MTT test was done to assess the cytotoxicity of the scaffolds. The proliferation and differentiation of the cells on the scaffold were observed by inverted microscope, SEM, and live/dead cell staining method. Results HE staining and Hoechst 33258 staining showed that there was no cell fragments in the scaffolds; sirius red staining showed that the ACBM scaffold was stained crimson or red and yellow alternating. SEM observation revealed a three dimensional interconnected porous structure, which was the microstructure of normal cancellous bone. Cytotoxicity testing with MTT revealed no significant difference in absorbance (A) values between different extracts (25%, 50%, and 100%) and H-DMEM culture media (P gt; 0.05), indicating no cytotoxic effect of the scaffold on BMSCs. Inverted microscope, SEM, and histological analysis showed that three dimensional interconnected porous structure of the scaffold supported the proliferation and attachment of BMSCs, which secreted abundant extracellular matrices. Live/dead cell staining results of cell-scaffold composites revealed that the cells displaying green fluorescence were observed. Conclusion Novel ACBM scaffold can be used as an alternative cell-carrier for bone tissue engineering because of thoroughly decellularization, good mircostructure, non-toxicity, and good cytocompatibility.