With the development of multi-slice spiral computed tomography (CT) technology and the popularization of low-dose spiral CT screening, more and more adenocarcinomas presenting ground-glass nodule (GGN) are found. Pathological invasiveness is one of the important factors affecting the choice of treatment strategy and prognosis of patients with early lung adenocarcinoma. Imaging features have attracted wide attention due to their unique advantages in predicting the pathologic invasiveness of early lung adenocarcinoma. The imaging characteristics of GGN can be used to predict the pathologic invasiveness of lung adenocarcinoma and provide evidence for clinical decisions. However, the imaging parameters and numerical values for predicting pathologic invasiveness are still controversial, which will be reviewed in this paper.
With the changes in the disease spectrum and the advancement of examination technology, the detection rate of multiple primary lung cancers (MPLC) is gradually increasing when multiple nodules and masses in the lung are examined clinically. MPLC has significant distinction with other types of lung diseases or lung cancers in the treatment and prognosis. In most cases, patients would be recommended to undergo the surgery as soon as possible which means that the accurate diagnosis should be made before surgery or during treatment. The newly developed molecular and genomic methods are more likely to better determine the relationship between multiple lesions. Artificial intelligence can be used as a related diagnostic aid to show more accurate and objective results in the diagnosis of multiple pulmonary nodules. This review summarizes the latest MPLC diagnostic research (including pathological analysis, imaging), analyzes surgical treatment methods, and looks forward to the future research direction of MPLC diagnosis and treatment, in order to provide reference for MPLC research.
Objective To study the influence of brominated furanones on the biofilm (BF) formation of Staphylococcus epidermidis (SE) on polyvinyl chloride(PVC) materials, and provide new ideas for the research of surface modification of materials and clinical treatment of biomaterial centered infection. Methods We chose three kinds of brominated furanone with representative chemical structure for our research which were respectively 3,4dibromo-5-hydroxy2 (5H) -furanone (Mucobromic acid) in the first furanone group, 4-bromo-5(4-methoxyphenyl)3(methylamino)2(5H)furanone in the second furanone group, and 3,4dibromo-5,5-bis(4-methylphenyl)2(5H)-furanone in the third furanone group. The PVC material soaked with 75% ethanol for 5minutes was classified as the control group. The surface coating of the PVC materials in the four groups all underwent modification respectively and then they were cocultivated with staphylococcus epidermidis together. Confocal laser scanning microscope(CLSM) was adopted to detect the thickness of bacterium BF and bacterium community quantity unit area on PVC materials and scanning electron microscope(SEM) was used to observe surface structure of SE, BF formation at 6 h, 12 h, 18 h and 24 h respectively. Results The results of CLSM showed that, compared with the control group, SE bacterium community quantity unit area and the thickness of bacterium BF on the PVC material surface in the second furanone group were obviously smaller (Plt;0.05). SE bacterium community quantity unit area and thickness of bacterium BF on PVC material surface in the first and the third furanone groups had no significant difference (Pgt;0.05). The result of SEM showed that, the quantity of SE bacterium community unit area on PVC material surface in the second furanone group were smaller than that of the control group at 6 hours. The biofilm structure on PVC material surface in the control group was formed at 18 hours, but there were no mature biofilm structure on PVC material surface in the second furanone group at 18 hours. Conclusion The impact of different brominated furanone on SE biofilm formation on the surface of PVC materials is different. The second kind of furanone can inhibit the quantity of SE bacterium community unit area and SE biofilm formation on the surface of PVC materials.
Objective To study the influence of brominated furanones on the biofilm formation of Escherichia coli on the polyvinyl chloride (PVC) material, and to provide new ideas for the research of surface modification of materials and cl inicaltreatment of biomaterial centered infection. Methods Three brominated furanones with representative chemical structurewere chosen and coated on the surface modification of PVC materials, respectively [furanone 1: 3, 4-dibromo-5-hydroxy-furanone; furanone 2: 4-bromo-5-(4-methoxyphenyl)-3-(methylamino)-furanone; furanone 3: 3, 4-dibromo-5, 5-bis (4-methylphenyl)- 2 (5H)-furanone]. All the modificated PVC materials and Escherichia coli were co-cultivated. The PVC material soaked with 75% ethanol for 5 minutes and Escherichia coli were co-cultivated together as the control group. The thickness of bacterial community and bacterial community quantity in the unit area on PVC materials were measured by confocal laser scanning microscope (CLSM), and the surface structure of biofilm formation was observed by scanning electron microscope (SEM). Results The CLSM showed that the thickness of bacterial community and the bacterial community quantity in the unit area of PVC materials was significantly less (P lt; 0.05) in furanone 3 group than in control group, but no significant difference (P gt; 0.05) was found between furanone 1, furanone 2 groups and control group. SEM showed that the quantity of bacterial community in the unit area of PVC materials surface in furanone 3 group was fewer than that in control group at 6 hours; the biofilm structure on PVC materials surface formed at 18 hours in control group, furanone 1 group, and furanone 2 group, but there was no mature biofilm structure on PVC materials surface in furanone 3 group at 18 hours. Conclusion The impact of different brominated furanones on Escherichia coli biofilm formation on the surface of PVC materials is different, 3, 4-dibromo-5, 5-bis (4-methylphenyl)-2 (5H)- furanone can inhibit Escherichia coli biofilm formation on the surface of PVC material.
Objective The intercellular adhesion (ica) gene of Staphylococcus epidermidis (SE) is a key factor to bacterial aggregation, to analysis the genotype of iatrogenic SE and to explore the effect of iatrogenic SE ica operon on theformation of bacterial biofilm on the surface of polyvinyl chloride (PVC). Methods Fifty-six cl inical isolates of iatrogenic SEwere selected, and PCR and gene sequencing were used to detect the genes related with bacterial biofilm formation. The genes contained 16S rRNA, autolysin (atlE), fibrinogen binding protein (fbe), and icaADB. The bacteria suspension of 1 × 105 cfu/mL iatrogenic SE was prepared; according to the test results of target genes, the PVC material and the genotype of icaADB+, atlE+, fbe+ strains were co-cultivated as the ica positive group; the PVC material and the genotype of icaADB-, atlE+, fbe+ strains were co-cultivated as the ica negative group. The thickness of biofilm and bacterial community quantity unit area on PVC materials were measured by confocal laser scanning microscope, and the surface structure of biofilm formation was observed by scanning electron microscope (SEM) at 6, 12, 18, 24, and 30 hours. Results The positive rate of 16S rRNA of iatrogenic SE strains was 100% (56/56). The genotype of icaADB+, atlE+, and fbe+ strains accounted for 57.1% (32/56). The genotype of icaADB-, atlE+, and fbe+ strains accounted for 37.5% (21/56). The sequencing results showed that the product sequences of 16S rRNA, atlE, fbe, and icaADB were consistent with those in GenBank. With time, no significant bacterial biofilm formed on the surface of PVC in ica operon negative group. But in ica operon positive group, the number of bacterial community was gradually increased, and the volume of bacterial biofilms was gradually increased on the surface of PVC. At 24 hours, mature bacterial biofilm structure formed, and at 30 hours, the volume of bacterial biofilms was tending towards stabil ity. The thickness of biofilm (F=6 714.395, P=0.000) and the bacterial community quantity unit area on PVC materials (F=435.985, P=0.000) in ica operon positive groupwere significantly higher than those in ica operon negative group. Conclusion Iatrogenic SE can be divided into 2 types ofica operon negative and ica operon positive bacteria. The iatrogenic SE ica operon can strengthen bacterium biofilm formation capabil ity on PVC materials, bacterium community quantity, and thickness of biofilm, it plays an important role in bacterium biofilm formation on PVC materials.
Objective To investigate the advantage of the concept of wide exposure in uniportal video-assisted thoracoscopic surgery (uniportal-VATS) for radical resection of lung cancer and assess its safety and feasibility. Methods Clinical data of 255 patients (110 males and 145 females, a mean age of 54.3±7.9 years) with non-small cell lung cancer (NSCLC) who received wide exposure in uniportal-VATS or three portal VATS (3P-VATS) during August 2017 to March 2018 were retrospectively analyzed. There were 153 patients (67 males and 86 females, a mean age of 56.1±8.5 years) in the uniportal-VATS group and 102 patients (43 males and 59 femals, a mean age of 54.4±7.4 years) in the 3P-VATS group. The clinical effects were compared between the two groups. Results There was no statistical difference in the operation time between the uniportal-VATS and 3P-VATS (135.0±45.6 min vs. 142.0±39.5 min, P>0.05). The overall number of dissected stations (6.9±1.0) and LNs (14.5±3.0) in the uniportal-VATS group were similar with those in the 3P-VATS group (7.1±1.0, 15.1±1.7). The dissected stations of N2 LNs (uniportal-VATS: 4.1±1.7, 3P-VATS: 3.9±0.8) and number of dissected N2 LNs (uniportal-VATS: 8.0±0.9, 3P-VATS: 7.8±1.1) were both similar between the two groups. The duration of postoperative tube drainage and postoperative hospital stay of uniportal-VATS group (3.5±1.8 d and 7.2±0.9 d) were much shorter than those of 3P-VATS group (4.0±1.3 d and 8.8±2.0 d). No significant difference was found in incidence of postoperative complication between the two groups except that the incidence of subcutaneous emphysema in the uniportal-VATS group was much lower. There was no perioperative death in the two groups. Conclusion The concept of wide exposure in uniportal-VATS can meet the requirment of radical resection and it is a safe and valid method which can be used for radical resection of lung cancer.
Lung cancer, as one of the malignant tumors with the fastest increasing morbidity and mortality in the world, has a serious impact on people's health. With the continuous advancement of medical technology, more and more medical methods are applied to lung cancer screening, which has gradually increased the detection rate of early lung cancer. At present, the standard operation for the treatment of early non-small cell lung cancer (NSCLC) is still lobectomy and mediastinal lymph node dissection. There is a growing trend to use segmentectomy for the treatment of early stage lung cancer. Anatomical segmentectomy not only removes the lesions to the maximum extent, but also preserves the lung function to the greatest extent, and its advantages are also obvious. This article reviews the progress of anatomical segmentectomy in the treatment of early NSCLC.
ObjectiveTo explore the influence of three central venous catheter biomedical materials (polyurethane, silicone, and polyvinyl chloride) on the proliferation, apoptosis, and cell cycle of Xuanwei Lung Cancer-05 (XWLC-05) cells so as to provide the basis for clinical choice of central venous catheter. MethodsXWLC-05 cells were cultured and subcultured, and the cells at passage 3 were cultured with polyurethane, silicone, and polyvinyl chloride (1.0 cm × 1.0 cm in size), and only cells served as a control. At 24, 48, and 72 hours after cultured, MTT assay was used to detect the cellular proliferation and flow cytometry to detect the cell cycle and apoptosis. At 72 hours after cultured, inverted microscope was used to observe the cell growth. ResultsInverted microscope showed the cells grew well in control group, polyurethane group, and silicone group. In polyvinyl chloride group, the cells decreased, necrosed, and dissolved; residual adherent cells had morphologic deformity and decreased transmittance. At 24 and 48 hours, no significant difference in proliferation, apoptosis, and cell cycle was found among 4 groups (P gt; 0.05). At 72 hours, the proliferations of XWLC-05 cells in three material groups were significantly inhibited when compared with control group (P lt; 0.05), and the cells in polyvinyl chloride group had more significant proliferation inhibition than polyurethane group and silicone group (P lt; 0.05), but there was no signifcant difference in proliferation inhibition between polyurethane group and silicone group (P gt; 0.05). Compared with the control group, three material groups had significant impact on the rate of apoptosis and cell cycle: polyvinyl chloride group was the most remarkable, followed by silicone group, polyurethane group was minimum (P lt; 0.05). ConclusionPolyvinyl chloride can significantly impact the proliferation, apoptosis, and cell cycle of XWLC-05 cells; polyurethane has better biocompatibility than polyvinyl chloride and silicone
ObjectiveTo investigate the effect of accessory gene regulator C (agr C) specific binding peptides (named N1) on the biofilm formation of Staphylococcus epidermidis on the surface of polyvinyl chloride (PVC) materials in vitro.MethodsFirstly, the two strains (ATCC35984, ATCC12228) were cultured with N1 at concentrations of 100, 200, 400, 800, and 1 600 μg/mL, respectively. The control group was cultured with agrC specific binding unrelated peptides (named N0) at the same concentrations and the absorbance (A) value was measured after 24 hours to determine the optimal bacteriostatic concentration of N1. The two strains were cultured with N1 and N0 of the optimal concentration, respectively. The A values were measured at 6, 12, 18, 24, 30, and 48 hours to observe the effect of N1 on the biofilm formation ability of Staphylococcus epidermidis. On this basis, the surface structure of the biofilm on the surface of PVC material was observed by scanning electron microscopy after 6, 12, 18, 24, and 30 hours of incubation with PVC material sheet. The thickness of the biofilm was observed by laser confocal microscopy after 6, 12, 18, and 24 hours of incubation with ATCC35984 strain.ResultsThe optimal bacteriostatic concentration of N1 was 800 μg/mL. ATCC 12228 strain did not form obvious biofilm after being cultured with N1 and N0. When ATCC35984 strain was cultured with N1 and N0 for 12 hours, the difference in biofilm formation ability between groups N1 and N0 was statistically significant (P<0.05), but there was no significant difference at 6, 18, 24, 30, and 48 hours (P>0.05). Scanning electron microscopy examination showed that mature biofilm structure was observed in ATCC35984 strain and was not observed in ATCC12228 strain. Laser confocal microscopy observation showed that the number of bacteria in the group N1 was significantly lower than that in the group N0 at 12 hours, and the most of bacteria were dead bacteria. There was no significant difference in the number of bacteria at 6, 18, and 24 hours, and the most of them were live bacteria. The biofilm thickness of group N1 was significantly lower than that of group N0 at 12 and 18 hours (P<0.05).ConclusionThe intensity of N1 inhibiting the formation of Staphylococcus epidermidis biofilm is dose-dependent. During the aggregation period, N1 can inhibit the biofilm formation by hindering the bacterial growth and aggregation. The inhibition effect on mature biofilm is not obvious.
ObjectiveTo analyze the gender-specific distribution patterns of the disease burden of tracheal, bronchial, and lung cancer (hereinafter referred to as lung cancer) attributed to tobacco from 1990 to 2021 globally and in China and the United States (US), and to predict the trend of disease burden changes from 2022 to 2031, aiming to provide multi-dimensional evidence-based support for optimizing tobacco control strategies and precise lung cancer prevention and control systems. MethodsData on the disease burden of lung cancer attributed to tobacco from 1990 to 2021 globally and in China and the US were extracted and integrated from the Global Burden of Disease (GBD) 2021 database. The Joinpoint 4.9.1.0 software was used to analyze the corresponding trends in disease burden. The Bayesian age-period-cohort (BAPC) prediction model was employed to forecast the disease burden of lung cancer from 2022 to 2031. ResultsIn 2021, China had the highest number of deaths and disability-adjusted life years (DALYs) due to lung cancer attributed to tobacco, followed by the US. The top three risk factors for lung cancer globally and in China and the US from 1990 to 2021 were tobacco, air pollution, and occupational risks. The disease burden of lung cancer patients attributed to tobacco has been decreasing year by year in the global and US populations [the average annual percentage change (AAPC) values of age-standardized mortality rate and DALYs rate were: globally: −0.96%, −1.28%; US: −2.33%, −2.72%], while it has been increasing in China (the AAPC values of age-standardized mortality rate and DALYs rate were 0.28% and −0.02%, respectively). From a gender perspective, the disease burden of male patients with lung cancer attributed to tobacco was much higher than that of female patients from 1990 to 2021. Compared to the global average, the disease burden of lung cancer attributed to tobacco in China and the US from 1990 to 2021 was still heavy, with China’s burden being higher than that of the US. The elderly population aged ≥65 years in the global context and in China and the US was the primary group affected by the disease burden of lung cancer attributed to tobacco. The BAPC prediction model indicated that from 2022 to 2031, the age-standardized rates of lung cancer attributed to tobacco in the global context and in China and the US would show a declining trend. ConclusionFrom 1990 to 2021, the disease burden of lung cancer attributed to tobacco in China and the US was still heavy compared to the global average, with China’s burden being significantly higher than that of the US. The focus on prevention and control for both countries remains among the middle-aged and elderly population (especially males), which is a key challenge for tobacco-related lung cancer prevention and treatment work in the next 10 years.