Objective To improve the accuracy of the acetabular component placement using the nonimage based surgical navigation system. Methods Twenty-three patients (14 males, 9 females; age, 28-55 years;26 hips）with hip disease underwent the total hip arthroplasty (THA) using the nonimage based surgicalnavigation system from February 2004 to April 2006. Rheumatoid arthritis was found in 3 patients (3 hips), necrosis of the femoral head in 6 patients (6 hips), and osteoarthritis in 14 patients (16 hips). All the patients were randomly divided into the following 2 groups: the navigated group (11 patients, 13 hips), treated by THA using the nonimage based surgical navigation system; and the control group (12 patients, 13 hips), treated by the traditional THA. According to thedesign of the study, the acetabular component was placed in the best inclination angle (45°) and the anteversion angle (15°). The postoperative component position was examined. Results No fracture, dislocation, infection or injury to the sciatic nerve was found. In the navigated group, the inclination and the anteversion reached 15.4±1.4° and 45.5±1.3°, respectively. In the control group,the inclination and the anteversion were 13.9±7.6° and 43.7±6.4°, respectively. The inclination difference was considered statistically significant (Plt;0.01). All the patients were followed up for 10-40 months,averaged 26 months. In the navigated group, the postoperative average Harris hip score was 95 (range,85-110), with an excellent result in 11 hips and a good result in 2 hips. In the control group, the postoperative average Harris hip score was 92 (range,75-110), with an excellent result in 9 hips, a good result in 3 hips, and a fair result in 1 hip. The Harris hip score difference was considered statistically significant (Plt;0.05). There was a significantly better result obtained in the navigated group than in the control group. Conclusion The acetabular component can be implanted accurately by the nonimage based surgical navigation system, which can reduce the incidence of the loosening of the prostheses and has an important value in clinical practice.
Objective To investigate a modified robotized hydraulictensor for management of the ligament balance in the total knee arthroplasty. Methods The effect of the modified robotized hydraulic tensor on the mechanical behaviour of the ligament system balance in the total knee arthroplasty was analyzed andthe related information was obtained. Results The robotized hydraulic tensor acted as a tensorsensor system, which could assist the surgeon by providing thequantitative information to align the lower limb in extension, equalize the articular spaces in extension and flexion, balance the internal and external forces, and define the femoral component rotation, and by providing the information toplan the releasing of the soft tissues and the rotating of the femoral component. Conclusion The modified robotized hydraulic tensor can enable the surgeon to properly manage the ligament balance in the total knee arthroplasty.
【Abstract】 Objective To introduce several navigation systems in anterior cruciate l igament reconstructionand to investigate the appl ication of navigation systems for the improvement in reconstruction of the anterior cruciatel igament. Methods The related l iterature was reviewed extensively, and the main current computer assisted surgery systems(OthoPilot system, Bone Morphing system, Fluoroscopic-based system, etc) for util ization in the anterior cruciate l igament reconstructionwere analyzed. Results The computer-assisted systems can enhance the accurate placement of tunnels. Accordingto the anatomical and isometric parameters, graft impingement on the intercondylar notch could be avoided, and individualideal implantation using 3D visual ization local isers was achieved. Conclusion It is possible that computer-assisted systemswill enable surgeons to better acquire the accuracy and rel iabil ity of the various operative techniques, to meet the demand ofsurgeon’s surgical optimisation and to improve the cl inical results.
Objective To design a new custom-made artificial semi-knee joint based on rapid prototyping(RP) technique and to explore a method to solve necroses of allocartilage in hemi-joint allotransplantation. Methods Based on the extracted 3D contour image of the articular cartilage of femoral condyle, the custom-made artificial semi-knee joint was designed with Surfacer 9.0 image processingsoftware. The artificial semi-knee joint design used the femoral condylar 3D contour of the patient as the outer face and the subchondral bone 3D contour of allograft bone as inner face. One dado for medullary nailand two for special designing cages which were used to fix the cartilage into the allograft were added on the inner face. After being converted into RP data format, the computerassisted design was imported into the LPS600 rapid prototyping machine, and the prototype was achieved. Furthermore, the prototype could be modified by hand according to the design. Then the RP model was used as a positive mould to build up a silica gel negativemould, and the negative mould was sent to the factory to manufacture Ti-6Al-4V alloy articular cartilage through ordinary mould-melted founding process. Finally, the whole metal cartilage was completed after melting two special cages on it andpolishing it. Results A new custom-made artificial semi-knee joint was made ad used to treat a 14-year old patient. The custom-made artificial semi-knee joint and the subchondral bone were a perfect match. The operative result was satisfactory. The patient could walk 5 weeks after operation. The bone healing of the auto-bone and allo-bone was achieved 6 months later. A follow-up period lasting 1 yearshowed that the knee joint played a good function. Conclusion The artificial semi-knee joint is a good match for the allograft boneand a good idea to solve necroses of allocartilage in hemijoint allotransplantation.
【Abstract】 Objective To investigate the qual itative rotation al ignment of components in total knee arthroplastyand the accuracy and the effectiveness of Bone Morphing computer assisted system when qual itatively practicing. MethodsFrom November 2002 to June 2003, 21 patients with three compartments osteoarthritis(21 knees) were treated by primarytotal knee arthroplasty after the conservative medical treatment failed, with the assistance of a “Bone Morphing” CeravisionSystem, implanted posterior stabil ized total knee prosthesis. Twenty-one patients included 5 males (5 knees) and 16 females (16knees) with an average age of 72.4 years (64-79 years) . The locations were left knee in 10 cases and right knee in 11 cases. Thepatients suffered from knee pain and l imitation of movement from 2 to 10 years. There were 14 genu varum and 7 genu valgumpreoperatively. The relative preoperative, intraoperative and postoperative data from cl inical check-up, the X-ray films and theintraoperative components rotational al ignment real-time records in CD Rom were analyzed. Results All operative incisionshealed up by first intension. Twenty-one patients were followed up 12-16 months(mean 13.3 months). For the achievement ofproper lower l imb al ignment and normal frontal laxity of knee, rotational al ignment of femoral components was from internalrotation (IR)1° to external rotation (ER) 5°, tibial components from IR 0° to ER 5°. In patients with genu varum, the rotationalal ignment of the femoral components was ER 1°- ER 5°, of tibial components ER 2°- ER 5°. In patients with genu valgum, the rotationalal ignment of femoral components was IR 1°- ER 4°, of tibial components IR 0°-ER 4°. After 3 months of operation, themean flexion angle measured as range of motion (ROM) was 115°(105-130°), the frontal laxsity measured as 0.2-0.5 cm (mean0.27 cm) of internal laxity and 1.0-2.5 cm (mean 1.7 cm) for external laxity, there were no knee pain, paterllar instabil ity or dislocationand abnormal knee frontal laxity. Conclusion Using Bone Morphing computer-assisted system can optimise theindividual components rotation al ignment accurately.
Objective To evaluate the feasibility and effectiveness of computer-assisted preoperative planning system—ACL Detector in anterior cruciate ligament (ACL) reconstruction. Methods Between March 2009 and January 2012, 80 patients with ACL rupture received arthroscopic ACL single-bundle reconstruction with autologous hamstring tendon transplantation. Before operation, the preoperative planning was done by computer-assisted preoperative planning system—ACL Detector (trial group, n=40) or by conventional method (control group, n=40). There was no significant difference in gender, age, disease duration, injury cause, preoperative Lysholm score, and preoperative International Knee Documentation Committee (IKDC) score between 2 groups (P gt; 0.05). After operation, the effectiveness was evaluated by Lachman test, pivot shift test, Lysholm score, and IKDC score; the digital three-dimensinal model of knee was reconstructed, and the impingement rate of ACL graft was measured. Results All incisions healed by first intention, and no complication was found. The patients were followed up 18-25 months (mean, 20 months) in trial group and 18-24 months (mean, 21 months) in control group. The Lysholm score and IKDC score were significantly increased at 18 months after operation when compared with preoperative scores (P lt; 0.05), but no significant difference was found between 2 groups (P gt; 0.05). The results of Lachman test and pivot shift test at 18 months after operation were significantly better than those before operation in 2 groups (P lt; 0.05), but no significant difference between 2 groups after operation (P gt; 0.05). MRI showed that impingement was observed in 1 case of trial group (2.50%) and in 8 cases of control group (20.00%), showing significant difference (χ2=4.51, P=0.03). Conclusion The computer-assisted preoperative planning system—ACL Detector could be successfully applied to ACL reconstruction. It has the same improvement in knee functional score as conventional surgery, but it is better than conventional surgery in reducing the impingement incidence.
Objective To review the CT appearances and important differential diagnoses of various primary and secondary mesenteric neoplasms. Methods By describing the mesenteric anatiomy and major routes for the dissemination of metastatic mesenteric tumors, the article presents both the common and rare types of various primary and secondary mesenteric neoplasms, and addresses the characteristic CT appearances and important aspects of the differential diagnosis. Results CT study, especially the multislice spiral CT (MSCT), along with the clinical history and other related information, can nicely depict various mesenteric tumors and well differentiate them from infectious, inflammatory or vascular processes affecting the mesentery. Conclusion CT is the imaging method of choice for the evaluation of tumors of small bowel mesentery.
Objective To investigate the clinical efficacy of computer-assisted cannulated screw internal fixation system based on error correction method for femoral neck fractures. Methods A retrospective analysis was made on the clinical data of 20 femoral neck fracture patients treated by computer-assisted cannulated screw internal fixation system based on error correction method between January 2014 and October 2015 (trial group), and 36 femoral neck fracture patients undergoing traditional manual surgery with closed reduction by cannulated screw fixation in the same period (the control group). There was no significant difference in gender, age, injury cause, side of fracture, types of fracture, and time from injury to operation between 2 groups (P>0.05). The operation time, intraoperative blood loss, intraoperative frequency of fluoroscopy and guide pin insertion, fracture healing time, fracture healing rate, and Harris hip score were compared between 2 groups. Results All incisions healed by first intention after operation, and no complication of blood vessel and nerve injury occurred. The operation time of trial group was significantly longer than that of control group (t=2.290,P=0.026), however, the intraoperative blood loss, intraoperative frequency of fluoroscopy and guide pin insertion of trial group were significantly less than those of control group (t=–10.650,P=0.000;t=18.320,P=0.000;t=–16.625,P=0.000). All patients were followed up 12-18 months (mean, 14.7 months). X-ray films showed that fracture healing was obtained in 2 groups, showing no significant difference in fracture healing time between 2 groups (t=0.208,P=0.836). No complication of ischemic necrosis of femoral head occurred during follow-up period. At last follow-up, the Harris hip score was 87.05±3.12 in trial group and was 86.78±2.83 in control group, showing no significant difference (t=0.333,P=0.741). Conclusion Computer-assisted cannulated screw internal fixation surgery based on error correction method for femoral neck fractures is better than traditional manual surgery in decreasing intraoperative radiation and surgical trauma during operation.
Post-stroke cognitive dysfunction is a common complication of stroke, and active rehabilitation therapy can effectively promote the recovery of patients. As a new treatment method, telecognitive rehabilitation is used in rehabilitation treatment of cognitive disorders. Its main technologies include computer-assisted cognitive rehabilitation, virtual reality technology, and artificial intelligence technology. It can use the Internet platform to provide homogeneous treatment, make patients more convenient for cognitive rehabilitation treatment, help to ensure the continuity of rehabilitation treatment, and save medical costs. This article describes the definition of cognitive telerehabilitation, the development and application of cognitive telerehabilitation technology, and summarizes the existing problems. The purpose is to provide a reference for the clinical application of cognitive telerehabilitation in China and future research directions.
ObjectiveTo observe the asynchrony patterns between left and right lungs in smokers and non-smokers,to assess the role of vibration response imaging(VRI) in the early detection and evaluation of smoking-related lung abnormalities. MethodsData were collected as follows:(1)past history and smoking history were collected;(2)exhaled CO test to confirm smoking status was performed;(3)VRI test was performed and the curve of Breath Energy Unit(BEU)was drawn,which is an energy versus time graph of the breath energy.The asynchrony between left and right lungs was derived from this graph;(4)pulmonary function test was performed.In the end,26 villagers with normal spirometry findings were included in the study.The subjects were divided into an ever-smoking group and a never-smoking group. ResultsThe BEU lung asynchrony was 2.0(3.0) frame in the never-smoking group,and 2.0(3.0) frame too in the ever-smoking group.Rank sum test showed that there was no significant difference(Z=-0.29,P=0.77) between the never-smokers and the ever-smokers in the lung asynchrony.Rank correlation analysis suggested that in the ever-smoking group,smoking index and BEU asynchrony had significant correlation(r=0.61,P=0.03).In the never-smoking group,the coefficient of passive smoking index and lung asynchrony was 0.52(P=0.07).The P value of the coefficient between passive smoking index and lung asynchrony was nearly 0.05,scatter between them could be seen a presence of a certain trend. ConclusionThe lung asynchrony in VRI has dose-effect relationship with ever-smokers' smoking level(smoking index).Thus,the lung abnormalities in VRI caused by the exposure to passive smoking is maybe the same as the abnormalities caused by direct smoking.