Objective To evaluate the fixation technique of using the cervical lateral mass plate in the cervical posterior approach operation. Methods Eight patients in this group were admitted from September 2001 to November 2006. Among the 8 patients, there were 6 males and 2 females, with their ages ranging from 28 to 78 years. Cervical vertebral fracture with dislocation was found in 4 patients, C2 spinal cord injury in 1, C1 fracture in 1, cervical spinal stenosis in 1, and C2-5 spinal cord neurofibroma in 1. Muscle strength 3-4. TheFrankel grading system was usedin 6 patients with traumatic injury. Before operation, Grade C was observed in 2patients，Grade D in 3，and Grade E in 1. All the operations were performed according to requirements of the Margel’s method. We positioned 40 screws in all the patients, including 4 screws at C2，6 screws at C3，12 screws at C4，4 screws at C5，4 screws at C6，2 screws at C7，and 6 screws at T1. Results The followingup for an average of 14.1 months (range,645 months) revealed that there was no malposition of the screws in the patients. One of the 8 patients developed spinal instability in the fixed segment at 3 months after operation. The headchestbrace was applied to the patient for 3 months, and the spinal fusion was achieved. The further followingup to 45 months indicated that there was no instability occurring. The remaining patients recovered to their spinal stability by the spinal fusion. The patients also recovered in their neurological function after operation. The Frankel assessment showed that 1 patient had Grade E, 3 from Grade D to Grade E, 1 from Grade C to Grade D, and 1 from Grade C to Grade E. Conclusion The cervical lateral mass plate fixation can provide the immediate and b segmental immobilization for the good cervical spine stability.
Objective To explore the factors to affect severity of hyperextension injury of the cervical spinal cord (HEICSC). Methods Forty-five patients with HEICSC, 35 males and 10 females, aged 27-67 years old (mean 48.2 years old), were retrospectively analyzed. The disease course was 30 minutes to 16 days. According to modified Frankel grading, there were 6 cases of grade A, 8 cases of grade B, 16 cases of grade C and 15 cases of grade D. Spinal cord injuries (SCI) segments were determined according to SCI plane and high signal change (HSC) in spinal cord on MR images. The whole or large part of HSC segments were supposed to be main injured spinal cord segments (MISCSs) and the staccato or patchy HSC ones were supposed to be common injured spinal cord segments (CISCSs). When the external force acting on head or face suffered was larger, the force produced during high-speed movement or forehead and/or face had severe contused and/or) lacerated wound, the force was defined severe traumatic strength, whereas the reverse was true for sl ight traumatic strength. According to signal magnitude of the cervical discs on T2-weighted MR images, degeneration of cervical discs and cervical vertebras were classified into 5 grades: grade 0-4. Cervical spinal stenosis were graded to 5 grades according to the width of anterior or posterior cerebrospinal fluid layer to spinal cord on T2-weighted MR images and compressed degree of spinal cord on T1-weighted MR images. The influence of traumatic strength, cervical spinal degeneration or cervical spinal stenosis on SCI were explored. Results Among the 45 cases, 12 cases were caused by sl ight traumatic strength, 33 cases were caused by severe one. The cervical spinal cord was injuried more sl ightly and the patients were older in the sl ight traumatic strength cases than in the severe ones (P lt; 0.05). The number of MISCSs were 45 in 40 cases and the 25 segments were located at C3, 4 level. The number of CISCSs were 39 in 21 cases. All the cervical vertebraes of the 45 patients had degenerated. The most were in grade 3 in 22 patients and the severest degenerative segments were mostly located in C5,6 discs in 35 ones. The number of the MISCSs in different degenerative grades of discs was 0 in grade 0, 9 in grade 1, 20 in grade 2, 14 in grade 3, and 2 in grade 4. The ratios of the segment number of injuried spinal cord to the segment number of spinal stenosis in every grade of stenosis were 1/62 in grade 0, 2/11 in grade 1, 27/52 in grade 2, 33/33 in grade 3, 21/22 in grade 4. Conclusion Three main factors including the magnitude of traumatic strength, the degree of instabil ity of cervical vertebrae and the degree of cervical stenosis contribute to development and progress of HEICSC.
Objective To study the cl inical appl ication of Mobi-C prosthesis in treatment of anterior cervical discectomy and artificial disc replacement (ADR). Methods Between January 2009 and June 2009, 20 cases of degenerative cervical disease were treated with anterior discectomy and ADR by Mobi-C prosthesis, including 13 cases of cervical disc herniation and 7 cases of cervical spondylotic radiculopathy, and 25 Mobi-C prosthesis were implanted. There were 8 males and 12 females, aged 29-54 years (mean, 45.2 years). The disease duration was from 4 days to 5 years (mean, 1.2 years). Affected segments of process included C3, 4 in 1 case, C4, 5 in 2 cases, C5, 6 in 7 cases, C6, 7 in 5 cases, C4, 5 and C5, 6 in 2 cases, and C5, 6 and C6, 7 in 3 cases. Radiographs were taken regularly, and cervical range of motion (ROM) on segments of disc replacements were measured. The functions of cervical spinal cord were evaluated by “40 score” system (COA) preoperatively, immediately postoperatively, and at follow-up. The qual ity of l ife was evaluated by neck disabil ity index (NDI) and visual analogue scale (VAS) score. Results All incisions healed by first intention. No perioperative compl ication was found. All cases were followed up 16.5 months on average (range, 14-18 months). There was no significant difference in cervical ROM of operatied segment between preoperation and follow-up duration (t=0.808，P=0.440). No heterotopic ossification was found at follow-up. COA score at last follow-up (38.20 ± 1.14) was significantly higher than preoperative one (32.10 ± 2.96) , (t=9.278，P=0.000) , and the improvement rate at last follow-up was 77.2% ± 5.4%. VAS score at last follow-up (3.20 ± 1.23) had significant difference when compared with preoperative one (5.10 ± 1.29), (t=10.585，P=0.000). NDI score at last follow-up (29.40 ± 4.55) had significant difference when compared with preoperative one (39.20 ± 3.80), (t=16.039, P=0.000). Conclusion A satisfactory short-term curative effect can be obtained by using Mobi-C prosthesis in treatment of anterior cervical discectomy and ADR.
OBJECTIVE: To discuss the value of anterior operation in fracture-dislocation of connect of cervical vertebrae and thoracic vertebrae. METHODS: From 1997, 21 patients with fracture-dislocation of connect of cervical vertebra and thoracic vertebrae were operated on. The interval between injury and operation was within 24 hours in 4 cases, 2-7 days in 9 cases, 8-14 days in 3 cases and within 4 weeks in 5 cases. The locations were C6,7 in 7 cases, C7 in 9 cases and T1 in 5 cases. The nerves function of spinal of all the cases have different degrees of injury. Classification of Frankel were the following: 3 cases of grade A, 6 cases of grade B, 9 cases of grade C, and 3 cases of grade D. The operative procedure included the following: anterior operation of cervical vertebrae; incision of most fracture vertebral body to decompress; transplantation of ilium bone grafting fusion; and internal fixation of anterior cervical vertebrae with locking-steel. RESULTS: In 21 patients, 1 died of accompanying by pulmonary infection; 20 were followed up 8 months to 3 years with an average of 21 months. All transplanted ilium had fused. The nerve function of spinal cord had recovered in different degrees(2 cases of grade A, 1 case of grade C, 9 cases of grade D and 8 cases of grade E); the turn of vertebral column was normal. No internal fixation failed. CONCLUSION: Anterior operation is a better way to treat fracture-dislocation of connect of cervical vertebrae and thoracic vertebrae with easy operation, less complications, satisfactory reduction of fracture and good stability.
Objective To summarize the methods andskills of anterior cervical locking plate systems in clinical application and to analyze the causes of some complications as well as give some preventive or remedial countermeasures. Methods From 1998 to 2002, 159 patients with cervical spondylotic myelopathy,fracturedislocation,tumor or tuberculosis of the cervical spine were treated with anterior locking plate systems. The complications were reviewed and analyzed. Results Ten kinds of complications related to anterior locking plate systems occurred in 21 patients. Most of the complications were caused by improperly-selecting implants, experience and technique deficiency. Conclusio The important preventive or remedial countermeasures are correctly-selecting patients, meticulous preoperative preparation, properly-selecting implants, standard and skillful manipulation and rational postoperative protection.
Objective To analyze the biomechanical changes of the adjacent cervical facet joints when the angled cervical prosthesis is replaced. Methods A total of 400 northwestern people were involved, with an age of 40 years or older.The cervical vertebra lateral X-ray films were taken, and the cervical angles were measured by professional computer aided design software, then the cervical intervertebral disc prosthesis with 10° angle was designed. The finite element models of C4，5and C4-6 segments with intact cervical discs were developed; the C4，5 disc was replaced by the cervical prosthesis with 0° and 10° angle respectively; and then all models were subjected to axial loading, flexion/extension, lateral bending, and torsion loading conditions; the stress effects on adjacent facet joints after replacement were observed by comparing with that of the intact model. Results The cervical angles were (9.97 ± 3.64)° in C3，4, (9.95 ± 4.34)° in C4，5, (8.59 ± 3.75)° in C5，6, and (8.49 ± 3.39)° in C6，7, showing no significant difference between C3，4 and C4，5, C5，6 and C6，7 (P gt; 0.05) and showing significant differences between the other cervical angles (P lt; 0.05). When C4，5 model was axially loaded, no significant difference in equivalent shearing stress were observed in intact, 0°, and 10° groups; at flexion/extension loading, the stress was biggest in intact group, and was smallest in 10° group; at lateral bending, the stress got the high rank in intact group, and was minimum in 10° group; at torsion loading, the stress state of 10° group approached to the intact one condition. When C4-6 model was loaded, the facet joint stress of the replaced segment (C4，5) decreased significantly at axial loading, flexion/extension, and lateral bending; while no obvious decrease was observed at torsion loading; the stress of the adjacent inferior disc (C5，6) decreased significantly at axial loadingand lateral bending condition, while less decrease was observed at torsion loading, no significant change at flexion/extension condition, it approached to that of the intact one. Conclusion The finite element analysis reveals that the biomechanical properties of 10° designed prosthesis is approximate to that of the intact cervical disc, thus the 10° designed prosthesis can meet the requirements of biomechanical function reconstruction of the cervical spine.
ObjectiveTo evaluate the mid-term clinical and radiological results of dynamic cervical implant (DCI) arthroplasty for degenerative cervical disc disease in Chinese population.MethodsBetween April 2010 and June 2011, 25 patients with single-segmental degenerative cervical disc disease underwent DCI replacement. Visual Analogue Scale (VAS), Japanese Orthopaedic Association (JOA) scores, Neck Disability Index (NDI) and 36-Item Short Form Health Survey Questionnaires (SF-36) were used for evaluation of neurological function and pain severity, before and after operation, and during follow-up period. Radiographic evaluation included range of motion (ROM) of C2–7, surgical segments and adjacent level, intervertebral height of the surgical segments, migration, subsidence of the implant and heterotopic ossification (HO).ResultsThe mean follow-up period was 72.3 months (ranged from 68 to 78 months). The VAS, JOA, NDI, and SF-36 mental and physical component summaries improved significantly after surgery (P<0.05) and remained stable over the whole observation period. The ROM (flexion/extension) and intervertebral height at the level treated with DCI remained at the first 2 years and partly reduced at the final follow-up. ROM for C2–7 and adjacent levels maintained during the follow-up period. DCI subsidence was observed in 11 segements, and 9 segements appeared heterotopic ossification.ConclusionsClinical efficacy of DCI arthroplasty improves and maintaines during the mid-to-long period of follow-up. HO formation is a common phenomenon, leading a dramatic decrease of ROM at index level and recurrence of neurological symptoms. Rate of implant subsidence and migration is relatively high, leaving a potential risk of symptom at index level and adjacent segment degeneration. It suggests that for patients with degenerative cervical disc disease, total disc replacement or anterior cervical discectomy and fusion is still the first choice instead of DCI arthroplasty.
Objective To investigate the operative method and efficacy of subcutaneous pedicle scar-band rotation flap in the treatment of cervical postburn scar contracture. Methods Between August 2008 and May 2010, 15 patients with cervical postburn scar contracture were treated with subcutaneous pedicle scar-band rotation flaps, including 9 males and 6 females with an average age of 17.3 years (range, 7-35 years). The disease duration was 1-8 years (mean, 3 years). The locations were the left cervical region in 6 cases, the right cervical region in 8 cases, and mental cervical angle region in 1 case. According to LI Ao’s classification standard for cicartrical contracture, there were 12 cases of grade I and 3 cases of grade II. The area of scar ranged from 8 cm × 5 cm to 25 cm × 12 cm. After scar relaxation, wounds were repaired with the subcutaneous pedicle scar-band rotation flaps of 7 cm × 5 cm to 15 cm × 10 cm at size. In 3 cases of grade II, free split thickness skin grafts (7 cm × 4 cm to 12 cm × 7 cm at size) were used simultaneously. Results After 2 weeks of operation, 2 scar-band flaps had distal partial necrosis and healing was achieved after dressing change with formation of hypertrophic scar; the others survived with healing of incisions by first intention. After 6-12 months of follow-up, all patients possessed good cervical contours, sufficient release of scar contractures, and normal cervico-mandicular or mental cervical angles. The skin’s color and texture were satisfactory. There was no recurrence of cervical scar contracture and other complications. All patients acquired normal cervical movement at last follow-up. Conclusion Subcutaneous pedicle scar-band rotation flap is a simple, efficient, and versatile technique in release of cervical postburn scar contracture. It is an effective method to make use of the lateral excess scar flap to resurface defects caused by scar release.
Objective To evaluate the cl inical appl ication value and short-term results of Vertex rod-screw system in cervical expansive open-door laminoplasty. Methods Between February 2008 and January 2010, 28 patients underwent Vertex rod-screw system fixation in cervical expansive open-door laminoplasty, including 15 cases of cervical spondylotic myelopathy, 5 cases of ossification of posterior longitudinal l igament，and 8 cases of cervical spondylosis with spinal stenosis. There were 16 males and 12 females, aged 42-77 years (mean, 61.3 years). The disease duration was 2 months to 11 years. The decompression range of cervical spine was from C3 to C7. The operation time, blood loss, Japanese Orthopedic Association (JOA) scores, and incidence of axial symptom were recorded. Pre- and postoperative curvature angles were demonstrated by the cross angle between posterior vertebral body margins of C2 and C7 on cervical X-ray films. The angle of the opened laminae was measured on CT scan at last follow-up. Results The operation time was (142.5 ± 22.8) minutes, and the blood loss was (288.2 ± 55.1) mL. All incisions healed by first intention. All patients were followed up 14-25 months (mean, 22 months). CT showed that no reclosed open-laminae or loosening and breakage of rod-screw system occurred at 1 week and 1 year after operation. The axial bony fusion rate was 89.3% (25/28). The improvement rate of JOA scores at 1 week after operation (29.5% ± 15.0%) was significantly smaller than that at 1 year after operation (64.9% ± 28.1%) (t=0.810, P=0.000). No case presented with C5 nerve root palsy. The cervical curvature angle was (24.29 ± 5.04)° before operation, was (23.89 ± 3.57)° at 1 week, and was (23.41 ± 3.35)° at 1 year after operation, showing no significant difference between pre- and postoperative angles (P gt;0.05). The angle of the opened laminae was (27.90 ± 4.74)° at 1 week after operation, and was (28.07 ± 4.21)° at 1 year after operation, showing no significant difference (P gt; 0.05). Conclusion Vertex rod-screw system in cervical expansive opendoor laminoplasty is effective in preventing reclosed open-laminae, which can reduce the loss of cervical curvature angle.