Objective To investigate the result of the transplantation of frozen canine phalangeal joint allografts perforated and incorporated with autogenic bone marrow. Methods A proximal interphalangeal joint defect of 1.5 cm was prepared at bilateral sides of twenty-four adult healthy out-bred dogs. Three different types of allografts were applied to repair the defects: fresh autogenic phalangeal joints (group A,n=16), frozen phalangeal joint allografts perforated and incorporated with fresh autogenic bone marrow(group B, n=16), and frozen phalangeal joint allografts(group C, n=16). Radiographic and histological study wereused to evaluate the survival of transplanted joints. The observation was done 1, 3, 6 and 12 months after operation respectively. Results Based on the radiographic and histological changes of the transplanted joints, the osteoarthropathy of transplanted canine phalangeal joints could be divided into 3 degrees: mild degeneration, moderate degeneration and severe degeneration. Mild degeneration was observed in group A from 3 to 12 months. Mild degeneration was also found in group B from 1 to 6 months, and the endochondral ossification was obvious within the drilled bony holes.However, some joints in group B underwent moderate degeneration 12 months after operation. Group C joints in the first month had moderate degeneration, which progressed to severe egeneration 3 months after operation. Conclusion Transplantation of frozen canine phalangeal joint allografts perforated and incorporated with autogenic bone marrow can effectively delay the degeneration of transplanted osteoarticular allografts at the early and middle stage.
Objective To observe the histological structure and cytocompatibility of novel acellular bone matrix (ACBM) and to investigate the feasibility as a scaffold for bone tissue engineering. Methods Cancellous bone columns were harvested from the density region of 18-24 months old male canine femoral head, then were dealt with high-pressure water washing, degreasing, and decellularization with Trixon X-100 and sodium deoxycholate to prepare the ACBM scaffold. The scaffolds were observed by scanning electron microscope (SEM); HE staining, Hoechst 33258 staining, and sirius red staining were used for histological analysis. Bone marrow mesenchymal stem cells (BMSCs) from canine were isolated and cultured with density gradient centrifugation; the 3rd passage BMSCs were seeded onto the scaffold. MTT test was done to assess the cytotoxicity of the scaffolds. The proliferation and differentiation of the cells on the scaffold were observed by inverted microscope, SEM, and live/dead cell staining method. Results HE staining and Hoechst 33258 staining showed that there was no cell fragments in the scaffolds; sirius red staining showed that the ACBM scaffold was stained crimson or red and yellow alternating. SEM observation revealed a three dimensional interconnected porous structure, which was the microstructure of normal cancellous bone. Cytotoxicity testing with MTT revealed no significant difference in absorbance (A) values between different extracts (25%, 50%, and 100%) and H-DMEM culture media (P gt; 0.05), indicating no cytotoxic effect of the scaffold on BMSCs. Inverted microscope, SEM, and histological analysis showed that three dimensional interconnected porous structure of the scaffold supported the proliferation and attachment of BMSCs, which secreted abundant extracellular matrices. Live/dead cell staining results of cell-scaffold composites revealed that the cells displaying green fluorescence were observed. Conclusion Novel ACBM scaffold can be used as an alternative cell-carrier for bone tissue engineering because of thoroughly decellularization, good mircostructure, non-toxicity, and good cytocompatibility.
Objective To compare canine decel luarized venous valve stent combining endothel ial progenitor cells (EPC) with native venous valve in terms of venous valve closure mechanism in normal physiological conditions. Methods Thirty-six male hybrid dogs weighing 15-18 kg were used. The left femoral vein with valve from 12 dogs was harvested to prepare decelluarized valved venous stent combined with EPC. The rest 24 dogs were randomly divided into the experimental group and the control group (n=12 per group). In the experimental group, EPC obtained from the bone marrowthrough in vitro ampl ification were cultured, the cells at passage 3 (5 × 106 cells/mL) were seeded on the stent, and the general and HE staining observations were performed before and after the seeding of the cells. In the experimental group, allogenic decelluarized valved venous stent combined with EPC was transplanted to the left femoral vein region, while in the control group, the autogenous vein venous valve was implanted in situ. Color Doppler Ultrasound exam was performed 4 weeks after transplantation to compare the direction and velocity of blood flow in the distal and proximal end of the valve, and the changes of vein diameter in the valve sinus before and after the closure of venous valve when the dogs changed from supine position to reverse trendelenburg position. Results General and HE staining observations before and after cell seeding: the decelluarized valved venous stent maintained its fiber and collagen structure, and the EPC were planted on the decelluarized stent successfully through bioreactor. During the period from the reverse trendelenburg position to the starting point for the closure of the valve, the reverse flow of blood occurred in the experimental group with the velocity of (1.4 ± 0.3) cm/s; while in the control group, there was no reverse flow of blood, but the peak flow rate was decreased from (21.3 ± 2.1) cm/s to (18.2 ± 3.3) cm/s. In the control group, the active period of valve, the starting point for the closure of the valve, and the time between the beginning of closure and the complete closure was (918 ± 46), (712 ± 48), and (154 ± 29) ms, respectively; while in the experimental group, it was (989 ± 53), (785 ± 43), and (223 ± 29) ms, respectively. There was significant difference between two groups (P lt; 0.05).After the complete closure of valve, no reverse flow of blood occurred in two groups. The vein diameter in the valve sinus of the experimental and the control group after the valve closure was increased by 116.8% ± 2.0% and 118.5% ± 2.2%, respectively, when compared with the value before valve closure (P gt; 0.05). Conclusion Canine decelluarized venous valve stent combined with EPC is remarkably different from natural venous valve in terms of the valve closure mechanism in physiological condition. The former rel ies on the reverse flow of blood and the latter is related to the decreased velocity of blood flow and the increased pressure of vein in the venous sinus segment.
【Abstract】 Objective To establ ish a animal model of osteonecrosis of femoral head in canine l ike human.Methods The thermal field of canine’s femoral head was three-dimensionally analyzed with fluent 6.2 software so that the best cryosurgery patent could be designed to maximize the osteonecrosis and minimize extra surgery trauma with the cryosurgery system invented by Shanghai Jiaotong University. Liquid nitrogen was pressurized to 0.5 MPa, poured into femoral head for 6.5 minutes, rewarming to 2 for 5 minutes and then repoured into it again for another 6.5 minutes. Ten three-foot canines were conducted as the animal models of osteonecrosis of femoral head according to the method above. At the end of followup,the results were reviewed by radiologic and pathologic check. Two dogs were conducted as control group. Results In the experimental group, one of the ten canines was testified to occur osteonecrosis of femoral head after one week pathologically, cell death and vessel breakage of cavitas medullaris in the femoral head was obvious under microscope; in other nine canines beingstill under follow-up, five with three-month follow-up at least progressed to the collapse of femoral head l ike human (Ficat III). In control group, no osteonecrosis was found. Conclusion Cryosurgery for osteonecrosis of the femoral head in three-foot canine model may become a method to establ ish the animal model of osteonecrosis of femoral head l ike human.
【Abstract】 Objective To measure the changes of bone mineral density and bone micro-architecture of thefemoral head that harvested from the three-foot bearing ethanol destroyed canine model for osteonecrosis of femoral head, and discuss the influences of local injection of ethanol and biomechanical loading to the structural properties of the femoral head. Methods Twenty-four Beagles were divided randomly into four-foot bearing canines and three-foot bearing canines. One fore-l imb was fixed randomly in three-foot bearing canines. Osteonecrosis was induced in all experimental animals by local injection of 5 mL pure ethanol into one side of the femoral head. The hind l imbs injected with NS were acted as control group, that of three-foot canines injected with ethanol were acted as three-foot canine group, and that of four-foot canines injected with ethanol were acted as four-foot canine group. The contralateral femoral head was injected into equal amount of NS. Animals were sacrificed at the time intervals of 1, 3, 6, and 12 weeks after the injection of ethanol. Quantitative microcomputedtomography was used to characterize changes in bone micro-architecture and bone mineral density of femoralhead. Results The clear three-dimensional model of trabecular bone of necrotic femoral head were obtained. There were no significant differences among 3 groups according to the time l ine by 1 week after ethanol injection(P gt; 0.05). At 3 weeks after injection of ethanol, in three-foot canine group and four-foot canine group, the volume of BMC, BMD, BVF, and BS/BV increased gradually as the distance to the drill ing canal increased. There were significant differences between 3 regions (P lt; 0.05). At 6 weeks, in three-foot canine group and four-foot canine group, the volume of BMC, BMD,BVF, and Tb.N of region I and II decreased significantly compared with region III (P lt; 0.05). At 12 weeks, there are no differences among 3 groups (P gt; 0.05). There were significant decreases in BMD values, BVF, BS/BV, Tb.N, Tb.Sp and Tb.Th after the injection of pure ethanol. And, the changes were more and more obvious by the time l ine. These changes were differentiable at 3 weeks after injection of ethanol, and became obvious at 6 weeks. These changes were more obvious at the part that near the injection canal. The changes in threefoot canine group were more obvious than that in four-foot canine group. Conclusion Resorption of necrotic compact bone trabecular may weaken the structural properties of the femoral head. Moreover, remodel ing and repairing process of necrotic bone trabecular may be hampered by constant biomechanical loading that presented in three-foot bearing canines, and thereby further weaken the structural properties of the femoral head. Biomechanical loading may be one of the critical reasons that lead to the collapse of femoral head.
Objective To investigate the feasibil ity of inducing canine BMSCs to differentiate into epithel ial cells in vitro with epithel ial cell conditioned medium (ECCM). Methods Five mL BMSCs were obtained from il iac spine of a healthy adult male canine with weighing 10 kg, and then isolated and cultured. The oral mucosa was harvested and cut into 4 mm × 4 mm after the submucosa tissue was el iminated; ECCM was prepared. BMSCs of the 2nd passage were cultured and divided into two groups, cultured in ECCM as experimental group and in L-DMEM as control group. The cell morphological characteristics were observed and the cell growth curves of two groups were drawn by the continual cell counting. The cells were identified by immunohistochemical staining through detecting cytokeratin 19 (CK-19) and anti-cytokeratin AE1/AE3 on the21st day of induction. The ultra-structure characteristics were observed under transmission electron microscope. Results The cells of two groups showed long-fusiform in shape and distributed uniformly under inverted phase contrast microscope. The cell growth curves of two groups presented S type. The cell growth curve of the experimental group was right shifted, showing cell prol iferation inhibition in ECCM. The result of immunohistochemical staining for CK-19 and anti-cytokeratin AE1/AE3 was positive in the experimental group, confirming the epithel ial phenotype of the cells; while the result was negative in the control group. The cells were characterized by tight junction under transmission electron microscope. Conclusion The canine ECCM can induce allogenic BMSCs to differentiate into epithel ial cells in vitro.
Objective Using chemically extracted acellular methods to treat extracranial section of the canine whole facial nerve, to evaluated its effects on nerve structure and the removal extent of Schwann cells and myel in. Methods Twenty whole facial nerves were exposed from 10 canines [weighing (18 ± 3) kg]. The extracranial trunk of canine facial nerve and its branches (temporal branch, zygomatic branch, buccal branch, marginal mandibular branch, and cervical branch) were dissected under l ight microscope. Twenty facial nerves were divided into the experimental group (n=12) and control group (n=8) randomly. In experimental group, the nerve was extracted with the 3%TritonX-100 and 4% sodium deoxycholate. In control group, the nerve was not extracted. HE staining and immunofluorescence histological stainings for Hoechst33258, P75, Zero, and Laminin were performed. Results After histological staining, it was found that myel in and Schwann cells were removed from the facial nerve while the basal lamina tube remained intact. The whole canine facial nerves (one nerve trunk and multiple nerve branches) had the similar result. Conclusion The canine whole facial nerve has natural structure (one nerve trunk and multiple nerve branches) by extracted with chemically extracted acellular methods, so it is an available graft for repairing the defect of the whole facial nerve.
Objective To evaluate the internal fixation effect, degradation, and biocompatibility of polylactic-co-glycolic acid/hydroxyapatite (PLGA/HA) absorbable cannulated screws in treatment of lateral femoral condyle fracture of canine so as to provide the theory basis for their further improvement and clinical application. Methods Sixteen adult male Beagles (weighing, 9-12 kg) were selected to prepare the models of bilateral lateral femoral condyle fracture; left fracture was fixed with PLGA/HA absorbable cannulated screws as experimental group and right fracture with metal screws as control group. At 2, 4, 8, and 12 weeks after operation, general observation was done and X-ray films were taken for observing fracture healing; bone mineral density was measured; the histological examination was performed; and the degradation property of absorbable cannulated screws was detected. Results All animals survived to the end of the experiment. General observations showed that no fracture displacement occurred and fracture healed at 12 weeks in 2 groups; no breakage, displacement, or loosening of screws was observed in experimental group. X-ray films results showed that the absorbable cannulated screws could not be found out by X-ray in experimental group, but metal screws could be found out in control group; fracture healed with time in 2 groups. The bone mineral density reached the peak at 8 weeks in 2 groups, and no significant difference was found between 2 groups and among different time points in the same group (P gt; 0.05). Histological examination showed that 2 groups had similar fracture healing process at different time points; no obvious inflammatory reaction was found around absorbable cannulated screws in experimental group. The degradation results of absorbable cannulated screws showed that the intrinsic viscosity and molecular weight distribution obviously decreased at 2 weeks; the number average molecular weight and the weight average molecular weight markedly decreased at 4 weeks; and the maximum shear force did not decrease obviously at 8 weeks, and then decreased significantly. Significant differences were found in all indexes among different time points in the same group (P lt; 0.05). Conclusion PLGA/HA absorbable cannulated screws and metal screws show similar fracture healing process for fixing lateral femoral condyle fracture of canine, and the absorbable canulated screws have good biocompatibility. The maximum shear force of PLGA/HA absorbable cannulated screw has no obvious decrease during 8 weeks after operation, so it can ensure full healing of fracture.
Objective To explore heterotopic chondrogenesis of canine myoblasts induced by cartilage-derived morphogenetic protein 2 (CDMP-2) and transforming growth factor β1 (TGF-β1) which were seeded on poly (lactide-co-glycolide) (PLGA) scaffolds after implantation in a subcutaneous pocket of nude mice. Methods Myoblasts from rectus femoris of 1-year-old Beagle were seeded on PLGA scaffolds and cultured in medium containing CDMP-2 and TGF-β1 for 2 weeks in vitro. Then induced myoblasts-PLGA scaffold, uninduced myoblasts-PLGA scaffold, CDMP-2 and TGF-β1-PLGA scaffold, and simple PLGA scaffold were implanted into 4 zygomorphic back subcutaneous pockets of 24 nude mice in groups A, B, C, and D, respectively. At 8 and 12 weeks, the samples were harvested for general observation, HE staining and toluidine blue staining, immunohistochemical staining for collagen type I and collagen type II; the mRNA expressions of collagen type I, collagen type II, Aggrecan, and Sox9 were determined by RT-PCR, the glycosaminoglycans (GAG) content by Alician blue staining, and the compressive elastic modulus by biomechanics. Results In group A, cartilaginoid tissue was milky white with smooth surface and slight elasticity at 8 weeks, and had similar appearance and elasticity to normal cartilage tissue at 12 weeks. In group B, few residual tissue remained at 8 weeks, and was completely degraded at 12 weeks. In groups C and D, the implants disappeared at 8 weeks. HE staining showed that mature cartilage lacuna formed of group A at 8 and 12 weeks; no cartilage lacuna formed in group B at 8 weeks. Toluidine blue staining confirmed that new cartilage cells were oval and arranged in line, with lacuna and blue-staining positive cytoplasm and extracellular matrix in group A at 8 and 12 weeks; no blue metachromatic extracellular matrix was seen in group B at 8 weeks. Collagen type I and collagen type II expressed positively in group A, did not expressed in group B by immunohistochemical staining. At 8 weeks, the mRNA expressions of collagen type I, collagen type II, Aggrecan, and Sox9 were detected by RT-PCR in group A at 8 and 12 weeks, but negative results were shown in group B. The compressive elastic modulus and GAG content of group A were (90.79 ± 1.78) MPa and (10.20 ± 1.07) μg/mL respectively at 12 weeks, showing significant differences when compared with normal meniscus (P lt; 0.05). Conclusion Induced myoblasts-PLGA scaffolds can stably express chondrogenic phenotype in a heterotopic model of cartilage transplantation and represent a suitable tool for tissue engineering of menisci.
Objective Native extracellular matrix (ECM) is comprised of a complex network of structural and regulatory proteins that are arrayed into a tissue-specific, biomechanically optimal, fibrous matrix. The multifunctional nature of the native ECM will need to be considered in the design and fabrication of tissue engineering scaffolds. To investigate the extraction techniques of naturally derived nerve ECM and the feasibil ity of nerve tissue engineering scaffold. Methods Ten fresh canine sciatic nerves were harvested; nerve ECM material was prepared by hypotonic freeze-thawing, mechanicalgrinding, and differential centrifugation. The ECM was observed by scanning electron microscope. Immunofluorescencestaining was performed to detect specific ECM proteins including collagen type I, laminin, and fibronectin. Total collagen and glycosaminoglycan (GAG) contents were assessed using biochemical assays. The degree of decellularization was evaluated with staining for nuclei using Hoechst33258. The dorsal root gangl ion and Schwann cells of rats were respectively seeded onto nerve tissue-specific ECM films. The biocompatibil ity was observed by specific antibodies for cell markers. Results Scanning electron microscope analysis revealed that nerve-derived ECM consisted of a nanofibrous structure, which diameter was 30-130 nm. Immunofluorescence staining confirmed that the nerve-derived ECM was made up of collagen type I, laminin, and fibronectin. The histological staining showed that the staining results of sirius red, Safranin O, and toluidine blue were positive. Hoechst33258 staining showed no DNA within the decellularized ECM. Those ECM films had good biocompatibil ity for dorsal root gangl ion and Schwann cells. The cotents of total collagen and GAG in the nerve-derived ECM were (114.88 ± 13.33) μg/ mg and (17.52 ± 2.34) μg/mg, showing significant difference in the content of total collagen (P lt; 0.01) and no significant difference in the content of GAG (P gt; 0.05) when compared with the contents of normal nerve tissue [(54.07 ± 5.06) μg/mg and (25.25 ± 1.56) μg/mg)]. The results of immunofluorescence staining were positive for neurofilament 200 after 7 days and for S100 after 2 days. Conclusion Nerve-derived ECM is rich in collagen type I, laminin, and fibronectin and has good biocompatibil ity, so it can be used as a nerve tissue engineering scaffold.