Objective To compare the biomechanical properties of personalized Y-shaped plates with horizontal plates, vertical plates, and traditional Y-shaped plates in the treatment of distal humeral intra-articular fractures through finite element analysis, and to evaluate their potential for clinical application. Methods The study selected a 38-year-old male volunteer and obtained a three-dimensional model of the humerus by scanning his upper limbs using a 64-slice spiral CT. Four types of fracture-internal fixation models were constructed using Mimics 19.0, Geomagic Wrap 2017, Creo 6.0, and other software: horizontal plates, vertical plates, traditional Y-shaped plate, and personalized Y-shaped plate. The models were then meshed using Hypermesh 14.0 software, and material properties and boundary conditions were defined in Abaqus 6.14 software. AnyBody 7.3 software was used to simulate elbow flexion and extension movements, calculate muscle strength, joint forces, and load torques, and compare the peak stress and maximum displacement of the four fixation methods at different motion angles (10°, 30°, 50°, 70°, 90°, 110°, 130°, 150°) during elbow flexion and extension. Results Under dynamic loading during elbow flexion and extension, the personalized Y-shaped plate exhibits significant biomechanical advantages. During elbow flexion, the peak internal fixation stress of the personalized Y-shaped plate was (28.8±0.9) MPa, which was significantly lower than that of the horizontal plates, vertical plates, and traditional Y-shaped plate (P<0.05). During elbow extension, the peak internal fixation stress of the personalized Y-shaped plate was (18.1±1.6) MPa, which was lower than those of the other three models, with significant differences when compared with horizontal plates and vertical plates (P<0.05). Regarding the peak humeral stress, the personalized Y-shaped plate model showed mean values of (10.9±0.8) and (13.1±1.4) MPa during elbow flexion and extension, respectively, which were significantly lower than those of the other three models (P<0.05). Displacement analysis showed that the maximum displacement of the humerus with the personalized Y-shaped plate during elbow flexion was (2.03±0.08) mm, slightly higher than that of the horizontal plates, but significantly lower than that of the vertical plates, showing significant differences (P<0.05). During elbow extension, the maximum displacement of the humerus with the personalized Y-shaped plate was (1.93±0.13) mm, which was lower than that of the other three models, with significant differences when compared with vertical plates and traditional Y-shaped plates (P<0.05). Stress contour analysis showed that the stress of the personalized Y-shaped plate was primarily concentrated at the bifurcation of the Y-shaped structure. Displacement contour analysis showed that the personalized Y-shaped plate effectively controlled the displacement of the distal humerus during both flexion and extension, demonstrating excellent stability. ConclusionThe personalized Y-shaped plate demonstrates excellent biomechanical performance in the treatment of distal humeral intra-articular fractures, with lower stress and displacement, providing more stable fixation effects.
ObjectiveTo investigate the effectiveness of anterior knee incision by the patellar longitudinal approach for osteotomy in treating type C fractures of the distal femur. MethodsBetween March 2010 and June 2014, 36 patients with type C fractures of the distal femur underwent fracture reduction and internal fixation by patellar longitudinal approach for osteotomy. There were 25 males and 11 females, aged 26-72 years (mean, 49 years). Injury causes included traffic accident injury (19 cases), falling injury from height (8 cases), and crushing injury (9 cases). There were 34 cases of closed fracture and 2 cases of open fracture. Associated fractures included 2 cases of patellar fracture and 4 cases of clavicular fracture; combined injuries included 4 cases of anterior cruciate ligament injury, 1 case of posterior cruciate ligament injury, 12 cases of meniscus injury, and 9 cases of medial and lateral collateral ligament injuries. It was 3-11 days from injury to operation (mean, 6 days). ResultsAmong 36 patients, 29 were followed up 12-24 months (mean, 18 months). Primary healing of incision was obtained, without infection or lower limb deep venous thrombosis. X-ray films showed fracture healing at 12-32 weeks (mean, 16.4 weeks). Neither loosening of screw and plate breakage nor valgus and varus knee occurred. Pain and stiff of the knee joint were observed in 4 and 2 cases, respectively; 4 cases walked with a cane. According to Hospital for Special Surgery (HSS) scoring system, the results were excellent in 21 cases, good in 7 cases, and fair in 1 case; and the excellent and good rate was 96.55%. The internal fixation was removed at 10-14 months after operation, and there was no re-fracture. ConclusionThe patellar longitudinal approach has the advantages of sufficient exposure, easy reduction, short operation time, good internal fixation, less damage of soft tissue, and less complication. So it is the appropriate approach to treat type C fractures of the distal femur.
ObjectiveTo evaluate the effectiveness of a clavicular hook plate with coracoclavicular ligament augmentation by suture anchor in the treatment of Neer types Ⅱ and Ⅴ distal clavicle fractures.MethodsBetween January 2010 and June 2016, 16 patients with Neer types Ⅱ and Ⅴ distal clavicle fractures were treated with clavicle hook plates and coracoclavicular ligament augmentation by suture anchor. There were 12 males and 4 females with an average age of 45.6 years (range, 14-81 years). The injury mechanism included falling in 10 cases, traffic accident injury in 2 cases, falling from height in 2 cases, and heavy object injury in 2 cases. The Neer classification of clavicle fractures included 2 cases of type Ⅱa, 13 cases of type Ⅱb, and 1 case of type Ⅴ. The injury severity score (ISS) was 6-29, with an average of 11.2. The time from injury to operation was 1-18 days, with an average of 6.4 days. The operation time, intraoperative blood loss, hospitalization stay, fracture healing, and postoperative complications were recorded; the disability of arm, shoulder, and hand (DASH) score, the shoulder joint Constant score, and the Oxford shoulder score (OSS) were used to evaluate the shoulder joint at last follow-up.ResultsAll operations were successfully completed. The operation time was 50-100 minutes, with an average of 75.6 minutes; intraoperative blood loss was 30-100 mL, with an average of 52.8 mL; hospitalization stay was 4-47 days, with an average of 13.7 days. All patients were followed up 1.2-7.5 years, with an average of 3.5 years. All clavicle fractures healed, and the healing time was 9.4-13.6 weeks, with an average of 11.9 weeks. No fracture nonunion, fracture displacement, failure of internal fixation, or incision infection, etc. occurred. Fifteen patients took out the hook plate after fracture healing and functional recovery, and 1 case refused to remove the hook plate from the second operation because of no obvious discomfort. At last follow-up, the DASH score was 0-13, with an average of 2.2; the shoulder joint Constant score was 90-100, with an average of 96.8; the OSS score was 12-14, with an average of 12.3.ConclusionClavicular hook plate with coracoclavicular ligament augmentation by suture anchor can help achieve good effectiveness with less postoperative complication in the treatment of Neer types Ⅱ and Ⅴ distal clavicular fractures.
ObjectiveTo review the research progress of wrist arthroscopy assisted treatment of distal radius fractures.MethodsTo summarize and describe the anatomical characteristics and fracture classification of the distal radius, indications and contraindications of wrist arthroscopy-assisted treatment, surgical methods, and associated soft tissue injuries, and summarize the advantages and disadvantages of the operation through a large number of literature at home and abroad on the treatment of distal radius fractures assisted by wrist arthroscopy.ResultsWrist arthroscopy as a minimally invasive technique for the treatment of distal radius fractures, compared with traditional surgery, can accurately observe intra-articular damage and perform operations under the microscope to avoid secondary damage to blood vessels, nerve, and tendon, etc., and can achieve one-stage repair and reconstruction by repairing the ligament, trigonal fibrocartilage complex, and carpal dislocation. It has the advantages of less trauma, fast postoperative recovery, extensive indications, fewer complications, and satisfactory effectiveness.ConclusionWrist arthroscopy has advantages that traditional X-ray film, CT, MRI, and arthrography examinations do not have. Moreover, wrist arthroscopy has achieved satisfactory effectiveness in the adjuvant treatment of intra-articular distal radius fractures.
ObjectiveTo investigate the effectiveness of total elbow arthroplasty (TEA) with preservation of triceps brachii insertion approach.MethodsBetween January 2012 and September 2017, 17 patients with elbow disease were treated with TEA with preservation of triceps brachii insertion approach. There were 3 males and 14 females, with an average age of 65.2 years (range, 48-85 years). The injuries located on left elbow in 5 cases and on right elbow in 12 cases. There were 11 cases of distal humerus fracture (AO type C1 in 2 cases and type C3 in 9 cases); the interval between fracture and operation was 3-10 days (mean, 4.1 days). There were 3 cases of osteoarthritis and 3 cases of rheumatoid arthritis, with the disease duration of 2-26 years (mean, 8.7 years). The postoperative elbow function and pain was assessed by Mayo elbow performance score (MEPS) and visual analogue scale (VAS) score, respectively. The prosthesis position, heterotopic ossification, and periprosthetic fracture were observed by X-ray films.ResultsAll incisions healed by first intention. Sixteen patients were followed up 18-69 months (mean, 40.6 months). Intraoperative ulnar nerve injury occurred in 2 cases, and healed after symptomatic treatment. At last follow-up, the MEPS score was 55-100 (mean, 90.3). The results were excellent in 11 cases, good in 2 cases, fair in 2 cases, and poor in 1 case, with an excellent and good rate of 81.3%. The VAS score was 0-2 (mean, 0.4). X-ray reexamination showed that no polyethylene wear, prosthesis loosening and fracture, abnormal prosthesis position, periprosthetic fracture occurred during the follow-up period, and the prosthesis survival rate was 100%. Heterotopic ossification occurred in 2 and 3 months after operation in 2 cases, respectively.ConclusionThe triceps on approach for TEA are satisfactory for distal humerus fracture, osteoarthritis, and rheumatoid arthritis.
Objective To evaluate the effectiveness of Kirschner wire fixation and coracoclavicular ligament reconstruction with suture anchor in the treatment of Cho type ⅡC distal clavicle fractures. Methods The data of 17 patients with Cho type ⅡC distal clavicular fractures, who were treated with Kirschner wire fixation and coracoclavicular ligament reconstruction with suture anchor between June 2019 and June 2021, was retrospectively analyzed. There were 11 males and 6 females with an average age of 38.7 years (range, 19-72 years). The fractures were caused by falling in 12 cases and traffic accident in 5 cases. All patients had fresh closed fractures. The interval from injury to operation was 1-5 days (mean, 2.6 days). The preoperative injury severity score (ISS) was 6-27 (mean, 10.2). The operation time, intraoperative blood loss, hospital stay, fracture healing, and postoperative complications were analyzed. The shoulder joint function was evaluated by disabilities of the arm, shoulder, and hand (DASH) score and Constant score at last follow-up. Results All operations were completed successfully. The operation time was 20-50 minutes (mean, 31.6 minutes). The intraoperative blood loss was 30-100 mL (mean, 50.6 mL). The hospital stay was 4-9 days (mean, 5.3 days). All incisions healed by first intention. All patients were followed up 12-16 months (mean, 13 months). All clavicle fractures healed, and the healing time was 8-15 weeks (mean, 11 weeks). No complications such as fracture displacement or nonunion caused by internal fixation failure occurred. During the follow-up, skin irritation caused by the Kirschner wire withdrawal occurred in 3 cases. The Kirschner wires were removed after fracture healing in 17 patients. At last follow-up, the Constant score of shoulder joint was 90-100 (mean, 98.2). The DASH score was 0-10 (mean, 1.5). ConclusionKirschner wire fixation combined with coracoclavicular ligament reconstruction with suture anchor in the treatment of Cho type ⅡC distal clavicle fractures has less postoperative complications and slight complications. It is convenient to remove the internal fixator. The Kirschner wire does not fix the distal clavicle fracture through the acromion, which has little effect on shoulder joint function and can obtain good effectiveness.
ObjectiveTo investigate the effectiveness of limited internal fixation combined with hinged super-articular external fixator to treat type C3 fracture of the distal humerus. MethodsBetween September 2007 and November 2012, 37 cases of type C3 fracture of the distal humerus were treated. There were 22 males and 15 females with an average age of 43.6 years (range, 22-66 years). The causes were accident injury in 24 cases, falling injury in 5 cases, falling from height in 4 cases, heavy crush injury in 2 cases, machine injury in 1 case, and other injury in 1 case. There were 22 cases of open injury and 15 cases of closed injury. The time from injury to operation was 3-46 hours (mean, 18 hours). ResultsNeedle tract reaction and incision infection occurred in 3 cases and 1 case respectively, healing of incision by first intension was obtained in the other cases. Thirty-six patients were followed up 9-48 months (mean, 25.4 months). Heterotopic ossification occurred in 3 cases after operation and no recurrence was found by release after fracture healing. Fractures healed in the other patients after 6-14 months (mean, 9 months) of operation except 1 patient who suffered chronic osteomyelitis. One patient had delayed ulnar neuritis at 12 months after operation, and the nerve function returned to normal after the ulnar nerve transposition. There was no bone ischemic necrosis, elbow joint instability, or loosening of internal fixation. At last follow-up, the average range of motion of injured elbow was 105.0° in flexion,-25.0° in extension, 69.2° in pronation, and 75.6° in supination. According to Mayo elbow joint function score (MEPS) and disability of arm shoulder and hand (DASH) score, the results were excellent in 22 cases, good in 8 cases, fair in 4 cases, and poor in 2 cases with an excellent and good rate of 83.3%; and according to Cassebaum elbow joint function score, the results were excellent in 21 cases, good in 7 cases, fair in 5 cases, and poor in 3 cases with an excellent and good rate of 77.8%. ConclusionA combination of limited internal fixation and hinged super-articular external fixator has satisfactory clinical curative effect for type C3 fractures of the distal humerus, relatively few complications.