Objective To discussion the diagnostic significance of CT three dimension reconstruction in local recurrence after surgery for gastric cancer. Methods Thirty-nine patients with gastric cancer recurrence after radical surgery were performed multislice CT scan between December 2004 and December 2008 in The Third Affiliated Hospital of Harbin Medical University, and the images were reconstructed by three dimension reconstruction in workstation. The axial CT images and three dimension images of gastric cancer recurrence patients were diagnosed and compared. Results The detection rates of axial images and three dimensional CT images were 82.1% (23/28) and 100% (28/28) for pathological morphology, 62.5% (10/16) and 93.8%(15/16) for extension of tumors, 66.7% (10/15) and 93.3% (14/15) for lymph node metastasis, 87.5% (7/8) and 87.5% (7/8) for distant metastasis, respectively. Conclusions CT three dimension reconstruction can carry out more direct and solid results, such as measuring the vertical thickness of the thickened gastric wall, observing the infiltration situation with proximal organ, and metastasis of the lymph node. The method of three dimension reconstruction used for the diagnosis of local recurrence after surgery for gastric cancer is better than the axial image, and it can supply data which would be useful for the tumor advancing treatment.
【Abstract】ObjectiveTo evaluate the value of MR imaging with a contrast-enhanced multi-phasic isotropic volumetric interpolated breath-hold examination (VIBE) in diagnosis of primary liver carcinoma. MethodsThirty-two consecutive patients with surgical-pathologically confirmed 42 foci of primary carcinoma of liver underwent comprehensive MR examination of the upper abdomen, routine two-dimensional (2D) T1WI and T2WI images were acquired before administration of Gd-DTPA for contrast enhancement. Then, contrast-enhanced multi-phasic VIBE was acquired followed by 2D T1WI images. The lesion appearances on hepatic arterial, portal venous and equilibrium phases of VIBE sequence were carefully observed along with delineation of hepatic arterial and portal venous structures. The lesion detection rates and lesion characterization ability were compared among various MR sequences. Results33(78.6%), 30(71.4%), 38(90.5%) and 42(100%) foci were displayed respectively on T2WI, non-enhanced T1WI, enhanced T1WI and enhanced 3D-VIBE images (P＜0.05). The hepatic arterial anatomy of 30 patients （93.8%） and the portal venous structure of 31 patients （96.9%） were clearly depicted on enhanced 3D-VIBE images. Using MIP and MPR reconstruction techniques, the feeding arteries of 14 foci and draining vein of 12 foci were clearly displayed.ConclusionHigh-quality 3D-VIBE images are not only better than 2D images in lesion detection and characterization for primary liver carcinoma, but also able to provide much more information about hepatic vascular anatomy.
Objective To assess the clinical value of preoperative localization coupled with computed tomography (CT) three-dimensional reconstruction in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection. Methods The clinical data of 30 patients of combined subsegmental/segmental resection in our hospital from December 2019 to October 2021 were retrospectively collected. There were 19 males and 11 females with the mean age of 56.4 (32.0-71.0) years. The pulmonary nodules were located by CT-guided injection of glue before operation. The three-dimensional reconstruction image and operation planning were carried out by Mimics 21.0 software. ResultsThe operations were all successfully performed, and there was no conversion to open thoracotomy or lobectomy. The mean tumor diameter was 11.6±3.5 mm, the mean distance between the nodule and the visceral pleura was 13.6±5.6 mm, the mean width of the actual cutting edge was 25.0±6.5 mm, the mean operation time was 110.2±23.8 min, the mean number of lymph node dissection stations was 6.5±2.4, the mean amount of intraoperative bleeding was 50.8±20.3 mL, the mean retention time of thoracic catheter was 3.2±1.1 d, and the mean postoperative hospital stay was 4.5±1.7 d. There was 1 patient of subcutaneous emphysema, 1 patient of atrial fibrillation and 1 patient of blood in sputum. Conclusion Preoperative CT-guided injection of medical glue combined with CT three-dimensional reconstruction of pulmonary bronchus and blood vessels is safe and feasible in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection, which ensures the surgical margin and reserves lung tissues.
Objective To review the application progress of digital technology in auricle reconstruction. Methods The recently published literature concerning the application of digital technology in auricle reconstruction was extensively consulted, the main technology and its specific application areas were reviewed. Results Application of digital technology represented by three-dimensional (3D) data acquisition, 3D reconstruction, and 3D printing is an important developing trend of auricle reconstruction. It can precisely guide auricle reconstruction through fabricating digital ear model, auricular guide plate, and costal cartilage imaging. Conclusion Digital technology can improve effectiveness and decrease surgical trauma in auricle reconstruction. 3D bioprinting of ear cartilage future has bright prospect and needs to be further researched.
【Abstract】Objective To investigate the anatomic structure and experimental methods of peribiliary vascular plexus(PVP) in rat’s hepatic portal bile duct.Methods To observe the morphological structure of PVP in rat’s hepatic portal bile duct after the hepatic artery was perfused with Chinese ink and transparency management, performed and to make three dimensional reconstruction of PVP’s spacial structure in MoticBuaa3Dvol software.Results The microvascular distribution and plane structure of PVP in rat’s hepatic portal bile duct could be shown clearly through Chinese ink perfusion and transparency management. The three dimensional structure of PVP could be reconstructed effectively by MoticBuaa3Dvol software, its effect was verisimilitude. Conclusion Chinese ink perfusion and vitrification is a simple and easy method in PVP’s morphologic study of rat’s hepatic portal bile duct. MoticBuaa3Dvol software is useful in microvascular study of hepatic portal bile duct.
Objective To explore and evaluate the accuracy and feasibil ity of individual rapid prototype (RP) drill templates for atlantoaxial pedicle screw implantation. Methods Volumetric CT scanning was performed in 8 adult cadaveric atlas and axis to collect Dicom format datas. Then three-dimensional (3D) images of atlas and axis were reconstructed and the parameters of pedicles of 3D model were measured by using software Mimics 10.01. The 3D model was saved by STLformat in Mimics. The scattered point cloud data of 3D model were processed and the 3D coordinate system was located in software Imageware 12.1. The curves and surfaces of 3D model were processed in software Geomagic Studio 10. The optimal trajectory of pedicle screw was designed and a template was constructed which accorded with the anatomical morphology of posterior arch of atlas and lamina of axis by using software Pro/Engineer 4.0. The optimal trajectory of pedicle screw and the template were integrated into a drill template finally. The drill template and physical models of atlas and axis were manufactured by RP (3D print technology). The accuracy of pilot holes of drill templates was assessed by visually inspecting and CT scanning. Results The individual drill template was used conveniently and each template could closely fit the anatomical morphology of posterior arch of atlas and lamina of axis. Template loosening and shifting were not found in the process of screw implantation. Thirty-two pedicle screws were inserted. Imaging and visual inspection revealed that the majority of trajectories did not penetrate the pedicle cortex, only 1 cortical penetration was judged as noncritical and did not injury the adjacent spinal cord, nerve roots, and vertebral arteries. The accuracy of atlas pedicle screw was grade 0 in 15 screws and grade I in 1 screw, and the accuracy of axis pedicle screw was grade 0 in 16 screws. Conclusion The potential of individual drill templates to aid implantation of atlantoaxial pedicle screw is promising because of its high accuracy.
Objective Based on images of pelvic CT three-dimensional reconstruction, to establish three-dimensional coordinate system of pelvis and investigate the three-axis displacement classification of pelvic fracture and its reduction principles. Methods Between June 2015 and May 2016, 21 cases of normal pelvic CT data were included in the study, and the mean pelvic three-dimensional model was established. The pelvic three-dimensional axis was established by defining the origin as the midpoint of the anterior superior iliac spine. Based on this coordinate system, a three-axis displacement classification of pelvic fracture were built. To assess the clinical guidance value of the three-axis classification, 55 cases (29 males and 26 females, aged 11-66 years with an average of 35.6 years) of pelvic fractures were analyzed by this classification, and replaced and fixed according to the principles of the reverse reduction. Results According to the theory of three-axis, pelvic fractures were divided into x-axis positive displacement/negative displacement, positive rotation/negative rotation; y-axis positive displacement/negative displacement, positive rotation/negative rotation; z-axis positive displacement/negative displacement, positive rotation/negative rotation. The average incision of included patients with pelvic fractures was 7.1 cm. The average reduction time was 12.2 minutes and the average radiation time was 55.3 s. The average time of screw implantation was 27.2 minutes. Postoperative pelvic X-ray films or three-dimensional CT showed all pelvic fracture was reducted well and the screw or plate was implanted correctly. The average intraoperative blood loss was 96.5 mL, the average operation time was 2.1 hours, and the average hospitalization time was 18.7 days. All patients were followed up 6-53 months (mean, 16.7 months). At last follow-up, according to Matta standard by pelvic radiography evaluation, there were excellent in 39 cases, good in 13 cases, and fair in 3 cases, the excellent and good rate was 94.55%. Conclusion Based on three-dimensional coordinate system, three-axis displacement classification of pelvic fracture can illustrate the displacement mode of patient simply and accurately, and can also guide the intraoperative reduction precisely.
Objective To assess the value of precise hepatectomy in treatment of primary hepatocellular carcinoma. Methods Three-dimensional (3D) models from MR image were reconstructed by 3D-Doctor software in 32 patients with primary hepatocellular carcinoma scheduled for liver resection between July 2007 and Sept 2009. From these 3D models, the vena cava, portal vein, hepatic vein, and short hepatic vein images were reconstructed, total liver volume, tumor volume, functional liver volume and ratio of functional liver volume to standard liver volume (SFLVR) were calculated. The patients were followed-up for 1-27 months, with an average of 12 months. Results The anatomic detail of liver veins and its relationship with the tumor could be displayed clearly in liver 3D models. By the 3D models, total liver volume was calculated as （1 353±419）ml, tumor volume as （287±248） ml, functional liver volume as （830±289） ml, and SFLVR as （71±22）%. Of 32 patients with hepatocellular carcinoma, right hemihepatectomy was performed in 8 cases, left hemihepatectomy in 2, and segmental or limited resection in 22. All operations were completed successfully. Postoperative complications included pulmonary infection in 1 case, bile leak in 1, moderate ascites (500-3 000 ml) in 8, and massive ascites (gt;3 000 ml) in 2 including one patient developed hepatic failure. Six and 12-month survival rates were 100% and 87%. Three, 6, and 12-month disease-free survival rates were 78%, 72%, and 72%. Conclusions Precise hepatectomy technique provides an accurate picture of liver veins anatomy and its relationship with the tumor， and allows the procedure to be simulated preoperatively for adequate and safe hepatectomy.
ObjectiveTo investigate the clinical effect of 3D computed tomography bronchial bronchography and angiography (3D-CTBA) and guidance of thoracoscopic anatomic pulmonary segmentectomy by Mimics software system. MethodsA retrospective analysis was performed on patients who underwent thoracoscopic segmentectomy in the Department of Thoracic Surgery of Affiliated People's Hospital of Jiangsu University from June 2020 to December 2022. The patients who underwent preoperative 3D-CTBA using Materiaise's interactive medical image control system (Mimics) were selected as an observation group, and the patients who did not receive 3D-CTBA were selected as a control group. The relevant clinical indicators were compared between the two groups. ResultsA total of 59 patients were included, including 29 males and 30 females, aged 25-79 years. There were 37 patients in the observation group, and 22 patients in the control group. The operation time (163.0±48.7 min vs. 188.8±43.0 min, P=0.044), intraoperative blood loss [10.0 (10.0, 20.0) mL vs. 20.0 (20.0, 35.0) mL, P<0.001], and preoperative puncture localization rate (5.4% vs. 31.8%, P=0.019) in the observation group were better than those in the control group. There was no statistically significant difference in the thoracic tube placement time, thoracic fluid drainage volume, number of intraoperative closure nail bin, postoperative hospital stay, or postoperative air leakage incidence (P>0.05) between the two groups. ConclusionFor patients who need to undergo anatomical pulmonary segmentectomy, using Mimics software to produce 3D-CTBA before surgery can help accurately identify pulmonary arteriovenous anatomy, reduce surgical time and intraoperative blood loss, help to determine the location of nodules and reduce invasive localization before surgery, and alleviate patients' pain, which is worthy of clinical promotion.
ObjectiveTo investigate the correlation between glenohumeral joint congruence and stability in recurrent shoulder dislocations. Methods Eighty-nine patients (89 sides) with recurrent shoulder dislocation admitted between June 2022 and June 2023 and met the selection criteria were included as study subjects. There were 36 males and 53 females with an average age of 44 years (range, 20-79 years). There were 40 cases of left shoulder and 49 cases of right shoulder. The shoulder joints dislocated 2-6 times, with an average of 3 times. The three-dimensional models of the humeral head and scapular glenoid were reconstructed using Mimics 20.0 software based on CT scanning images. The glenoid track (GT), inclusion index, chimerism index, fit index, and Hill-Sachs interval (HSI) were measured, and the degree of on/off track was judged (K value, the difference between HSI and GT). Multiple linear regression was used to analyze the correlation between the degree of on/off track (K value) and inclusion index, chimerism index, and fit index. ResultsMultiple linear regression analysis showed that the K value had no correlation with the inclusion index (P>0.05), and was positively correlated with the chimerism index and the fit index (P<0.05). Regression equation was K=–24.898+35.982×inclusion index+8.280×fit index, R2=0.084. ConclusionHumeral head and scapular glenoid bony area and curvature are associated with shoulder joint stability in recurrent shoulder dislocations. Increased humeral head bony area, decreased scapular glenoid bony area, increased humeral head curvature, and decreased scapular glenoid curvature are risk factors for glenohumeral joint stability.